Originally Posted by cyph3r

Same here! Already upgraded the 4.2" radio to 8"...seems like the next step! Out of curiosity besides aesthetics what are the advantages to the large productivity screen?

Originally Posted by TexasFording

Not really. I didnt have to. Maybe its because the IPC I bought was from a TT?

I have one inbound from a 5.0, and I'll see if that was the case. I think it might be.

Now, I agree that if you program the IPC with the wrong as-built, you'll have to redo a lot of programming. So best idea is to get an asbuilt from a VIN that is as closest to yours and you minimize the programming you have to do.

BTW, how much demand is there for these clusters?

Originally Posted by TexasFording

That's not my experience. There are tools that allow you to change the mileage on the cluster. I did it because, like you, my truck had way less miles than the cluster. It was either pay someone 100 bucks (plus shipping) to change it, or you can buy the tool for 75 dlls (google it, they are plentiful).

When I swapped mine, even using my as built, the incorrect mileage showed (from the donor truck). I have another on the way and I'll verify this (I dont wanna be talking out of my @$$)

Also, dealers can change it. My brother's cluster in his '13 F150 died of mechanical failure, he took it in, the dealer replaced it and had one less mile than before (the 10ths of a mile part).

I guess it depends on how good and willing the dealer is to do proper work. I have also seen dealers take the lazy way and just stick the decal in the door jamb.

Originally Posted by 2016BoostedGreyGoose

Maybe...however the one I bought was also from a ecoboost, however it was a 4x4 so there were all sorts of DTCs and warning lights on the cluster, so again, I DID have to do this.....since my truck is 2wd

I wasnt taking about the cluster. I was trying to say that you cannot change the actual mileage as it is LOCKED in the ECU. Sure Ford can change what the cluster is reading but what is in the ECU cannot be changed by us...... The dealership I went to had no clue that this cluster would even work in my truck since it didnt come with it. I had to push to get them to even program it using my data.....so each dealership is different.

Originally Posted by Livnitup

New feature found tonite: Auto relock (If you press the unlock button on the remote control and do not open a door within 45 seconds, your vehicle locks)

726-15-02 0000 0000 01xx - Auto relock enabled

Originally Posted by 2016BoostedGreyGoose

Oh hey just a lil info...tried FORscan on my wife's 2015 Mazda CX-5, and though there wasn't alot that could be changed I did enable 1 cool feature. Auto lock when you walk away from the vehicle. Obviously you have to have the key fob with you but....when you get out and close the door, you hear a beep, then when you walk about 6ft away you hear the vehicle lock. She has push button start, sooooo maybe you guys with push button start might have this option available. I dont, I have the stupid key...lol

Originally Posted by tonyrf150

This is something cool for the f150 what did you change?

Originally Posted by quantum

Can anyone inform me on what, if anything, the following options do?


Approach Detection 1


Thanks in Advance .....

Originally Posted by srg963

I would also like to know this one, as there are 5 available options.