Originally Posted by Texrep

What flavor truck do you have?


You can
1 get rid of the dreaded double honk
2 get navigation for the price of a map card.
3 display heated/ cooled seats icons on MFT
4 Cange the timeouts for aux outlets
5 have the radio come on with no key or fob
6 veiw text while driving and able to program Nav destinations
I might missed a few but there are always more in the works

Originally Posted by carrierj

Yes, the jig is up on the Nav.

Originally Posted by jlgo222

So just some value's to play with here.... I am out of country and away from my truck so i wont be able to test these changes. There are only 4 total PID address that have any difference's, and i feel only 2 of them can be related to PAM. Can some of you guys with the Parking Assist test this for me to see if it is related?
PID with PAM -> My PID w/o PAM

I have compared Three Plat's Mine w/o Parking Assist Module, and 2 with PAM.

BCM 726-10-01 xxxx 3047 xxxx -> 3947 This to me appears to be the VIN checksum digit, or VIN digit #9. Only difference via the window sticker is White Plat Met. clear coat, Livinit spreadsheet says give hill start error. Dose not likely relate to PAM, as the 2 PAM trucks I compared have different numbers, yet mine matches 1 PAM truck.

BCM 726-10-02 43xx -> 41xx No clue what this is.... Maybe the enable/disable of Parking Assist??? EditedVery different value than what Livinitup has in his spreadsheet) This is because i was not looking at the checksums....

BCM 726-11-01 xx33 3536 30 (Black Plat) -> xx33 3536 31 (White Met. Plat) -> xx36 3932 34 (Mine White Plat no PAM), Livinit spreadsheet says give hill start error.

BCM 726-12-01 0163 099E 56 -> 014B 099E 56 Confirmed with Livinitup spreadsheet Axle ratio difference. Kinda Odd to see that my truck has the second set of values matching Livinitup's 099E, so i believe only the first set of Data is related to Axle ratio.

Originally Posted by jlgo222

Just checked the APIM and only one value is different for my truck between the 2 PAM trucks. Is there anything the Parking Assist displays on the 8" Productivity Screen?

Originally Posted by Texrep

What flavor truck do you have?


You can
1 get rid of the dreaded double honk
2 get navigation for the price of a map card.
3 display heated/ cooled seats icons on MFT
4 Cange the timeouts for aux outlets
5 have the radio come on with no key or fob
6 veiw text while driving and able to program Nav destinations
I might missed a few but there are always more in the works

Originally Posted by Texrep

Well I give up I've tried everything and I cannot get this to load the IPC for the temps.

Tried Bob's coding this morning and nothing. I havn't tried to change any other modules with this bluetooth setup but every thing else seems to be working. I noticed it not reading the PID data engine running or not.

Originally Posted by Johnny_bravo00

Huge thanks to Coyote V-8 for helping disable DRL on my Canadian truck as well as enabling temp controls / heated seat icons. And by "helping", I basically mean him doing it, and me trying to learn something.

Originally Posted by fordtrk

Here is what I did, maybe it will work for you. Clear all dtcs then goto IPC and change your values to the 5. If it don't work I can hook back up to mine and give you my values. I have sync 2. Hope this helps