Topic Sponsor
1987 - 1996 F150 Still running strong! Talk about your 8th and 9th generation Ford F150 trucks.

Help!

Thread Tools
 
Search this Thread
 
Old 07-08-2008, 09:14 PM
  #1  
94 f-150 4.9 5spd
Thread Starter
 
scooten94150's Avatar
 
Join Date: Oct 2007
Location: Louisville,oh
Posts: 18
Likes: 0
Received 0 Likes on 0 Posts
Question Help!

i have a 1994 f150 4.9 5speed new battery,new solenoid, new neutral safety/reverse switch. and it wont start by turning the key...... but it will start by jumping it by the solenoid.. but the ignition is getting power b/c the lights on the dash com on and the speedometer moves a lil when i turn the key. does any who or think what this problem could b?
Old 07-08-2008, 09:38 PM
  #2  
We'd do it

iTrader: (1)
 
Just call me Sean's Avatar
 
Join Date: May 2008
Location: Orlando,Fl.
Posts: 35,602
Received 449 Likes on 402 Posts

Default

The lights coming on have nothing to do with the starting. The lights come on in the on position, it starts in the start position, 2 different positions. Try the ignition switch, not the key, the electrical ignition switch. Sometimes the rod that acutates the ignition switch doesn't pull the switch enough either. Pull out the switch and try it by hand. Remember, the switch, not the lock cylinder.
Old 07-08-2008, 10:16 PM
  #3  
94 f-150 4.9 5spd
Thread Starter
 
scooten94150's Avatar
 
Join Date: Oct 2007
Location: Louisville,oh
Posts: 18
Likes: 0
Received 0 Likes on 0 Posts
Default

i tried that too and it didnt work
Old 07-08-2008, 10:22 PM
  #4  
We'd do it

iTrader: (1)
 
Just call me Sean's Avatar
 
Join Date: May 2008
Location: Orlando,Fl.
Posts: 35,602
Received 449 Likes on 402 Posts

Default

Did you adjust the neutral safety switch correctly? Try starting it in every gear position and also hold the key to start while you move the gear shift through all positions. Keep your foot on the brake.
Old 07-08-2008, 10:26 PM
  #5  
94 f-150 4.9 5spd
Thread Starter
 
scooten94150's Avatar
 
Join Date: Oct 2007
Location: Louisville,oh
Posts: 18
Likes: 0
Received 0 Likes on 0 Posts
Default

nope didnt work
Old 07-08-2008, 11:05 PM
  #6  
We'd do it

iTrader: (1)
 
Just call me Sean's Avatar
 
Join Date: May 2008
Location: Orlando,Fl.
Posts: 35,602
Received 449 Likes on 402 Posts

Default

My wiring diagrams are showing start wire through the #11 20A fuse, check that.
Old 07-09-2008, 12:15 AM
  #7  
94 f-150 4.9 5spd
Thread Starter
 
scooten94150's Avatar
 
Join Date: Oct 2007
Location: Louisville,oh
Posts: 18
Likes: 0
Received 0 Likes on 0 Posts
Default

fuse is good
Old 07-09-2008, 12:31 AM
  #8  
We'd do it

iTrader: (1)
 
Just call me Sean's Avatar
 
Join Date: May 2008
Location: Orlando,Fl.
Posts: 35,602
Received 449 Likes on 402 Posts

Default

Looks like you are going to have to do some testing for voltage. You can use a test light or voltmeter. Check for power at each item in and out. These are in order. Key must be turned to start.
Ignition switch-white/pink stripe or red/light blue stripe: start wire out
fuse #11- test each side
clutch position switch- in, same color as above, out, red/light blue stripe
starter relay- in, red/light blue stripe

You can start checking from the relay and go backwards also, I would check the out wire from the clutch position switch first.

Last edited by Just call me Sean; 07-09-2008 at 12:37 AM.
Old 07-09-2008, 12:33 AM
  #9  
We'd do it

iTrader: (1)
 
Just call me Sean's Avatar
 
Join Date: May 2008
Location: Orlando,Fl.
Posts: 35,602
Received 449 Likes on 402 Posts

Default

I need to edit for manual transmission, so read it again in a few minutes.




All times are GMT -4. The time now is 12:26 AM.