Topic Sponsor

Power Window on 95 XLT?

Thread Tools
 
Search this Thread
 
Old 08-15-2012, 11:47 AM
  #1  
Junior Member
Thread Starter
 
Barkinspyd3rs's Avatar
 
Join Date: Oct 2011
Location: Cary, NC
Posts: 26
Likes: 0
Received 0 Likes on 0 Posts
Default Power Window on 95 XLT?

Driver Side Power window does not work. Is there anyway to determine if is the Motor or the Switch? Any Suggestion will be greatl appreciated!

rmpond@gmail.com
Old 08-15-2012, 08:06 PM
  #2  
Senior Member
 
go501green's Avatar
 
Join Date: Aug 2012
Posts: 117
Received 10 Likes on 8 Posts

Default

Almost always the motor. I think you could use a test light and see if any juice is going from the switch to the motor.
Old 08-16-2012, 05:03 PM
  #3  
Junior Member
Thread Starter
 
Barkinspyd3rs's Avatar
 
Join Date: Oct 2011
Location: Cary, NC
Posts: 26
Likes: 0
Received 0 Likes on 0 Posts
Default

Howhard is it to remove the Motor in a 95 f150 4x4?
Old 08-19-2012, 07:44 AM
  #4  
Member
 
smokinbutnotbroken's Avatar
 
Join Date: Jun 2012
Location: Las Vegas
Posts: 66
Likes: 0
Received 4 Likes on 3 Posts
Default

Does the motor still make noise when you flip the switch as if its trying to work? if so the gears inside the motor (seperatley replaceable) are ground off.. as said earlier it is usually the motor that burns up first. Ive found it easiest to take off the door panel slice or grind a hole in the door directly in front of the motor ( being careful not to damage parts behind ) unless you want to dick around with a wrench for an hour removing the one bolt covered by the skeleton of the door..unbolt and unclip the motor pull it out. simply put juice directly from your battery to the motor to determine if it works or not, if it does not replace the switch.



Quick Reply: Power Window on 95 XLT?



All times are GMT -4. The time now is 07:16 PM.