Hey all I'm new to the forum. I have a 1992 f150 302 (fuel injected) and I can't get spark from the coil. I replaced the coil today and still no luck. I do get power to the coil but once again nothing out. Any help would be greatly appreciated.

 

http://easyautodiagnostics.com/ford_...d_module_1.php

 

Thanks Forge, looks like a great link

 

No problem

 

Still no luck, I've tried a new coil, new ICM, and new distributor but not all 3 at the same time. I have the new distributor in it now and tomorrow I'll be putting the new coil and ICM in it. Any other ideas folks?

 

You did the troubleshooting steps?

 

Is the distributor and ICM putting out a signal? Sounds like a wiring issue.

 

Which is covered in the link I posted. IF they did the troubleshooting steps

 

I did the steps. Everything pointed at a bad pickup sensor in the distributor(still didn't get a spark). I now have a new distributor, coil, ICM,(truck had new plugs, plug wires, cap, and rotor when I bought it). I'm waiting for the battery to charge to try starting with all of the new parts. If that doesn't work anybody have any other ideas?

 

Still no luck