jonesn64

Any easy fixes or anything to check for the cruise on a 1994 XLT???? Im getting nothing illuminating on the dash while trying to engage the cruise. Where do I start?

DaughtryLc

Check all the fuses.....cruise runs off a fuse

jonesn64

Fuse is good. Where to now? Vac line or eletrical?

DaughtryLc

does the horn work??

DaughtryLc

Couple things...if Im away from the PC......If the horn does not work could be the Clock Spring http://fullsizebronco.com/forum/showthread.php?t=62939 it does work could be this...... Sometimes the module itself rusts up. It's on the driverside inner fender, with a cable that runs to the throttle body. You can remove the cover, which is the electronics of the module, and check to see if the drive motor is seized. I had to use a pair of pliers to loosen it and put some oil on the bearings.

jonesn64

The horn does work. Headn out to browse and tinker with the module! Thanks for your direction Daughtry

jonesn64

the motor seems to be ok. It was not froze up or seized. So I squirted some sea foam lube about and replaced it back to it original position.

jonesn64

after a quick lube and returning everything back to where it came from I went for a fast test drive. It seems that the on/off switch and the resume/set and coast do work. When it was turned on I could hear the resume/set and coast click as they were actuating but not setting the cruise. Where next??

DaughtryLc

I'm out of ideas. ....I heard that if all the brake lights are not working it will mess up the cruise. ....sorry.....

jonesn64

I heard the brake light thingie too but all are working. Thanks for your help Daughtry!..........SOMEONE PLEASE HELP ME!!! Last thing I wanna do is go to my local shop and them whack me witha $900.00 bill before Christmas!!