Topic Sponsor

Anyone know what this is?

Thread Tools
 
Search this Thread
 
Old Nov 8, 2015 | 03:37 PM
  #1  
Damon Jones's Avatar
Thread Starter
Junior Member
 
Joined: Nov 2015
Posts: 3
Likes: 0
Default Anyone know what this is?

It's in the driver side door of a 1995 F150...It appears stock, but I don't see it on any diagrams.
Reply
Old Nov 8, 2015 | 05:37 PM
  #2  
Chris_1's Avatar
5 Year Member
10 Year Member
iTrader: (1)
 
Joined: Mar 2014
Posts: 5,811
Likes: 712
From: Ontario, Canada
Default

Wiring in the door will be : speakers, courtesy (safety) light, power window, power mirror, power lock. The only other thing you can find is a switch thing going to the key cylinder for the alarm.
It's one of those. Door might have been changed and the truck didn't have the same options ?
Reply
Old Nov 9, 2015 | 04:58 PM
  #3  
Damon Jones's Avatar
Thread Starter
Junior Member
 
Joined: Nov 2015
Posts: 3
Likes: 0
Default

Hum...I wonder where it attaches...and. would it be OK to just remove it?
Reply
Old Nov 9, 2015 | 07:35 PM
  #4  
Chris_1's Avatar
5 Year Member
10 Year Member
iTrader: (1)
 
Joined: Mar 2014
Posts: 5,811
Likes: 712
From: Ontario, Canada
Default

Where does the other end of the wires go ?
Reply
Old Nov 9, 2015 | 07:53 PM
  #5  
Damon Jones's Avatar
Thread Starter
Junior Member
 
Joined: Nov 2015
Posts: 3
Likes: 0
Default

To a small harness..located around the cylinder lock.
Reply
Old Nov 9, 2015 | 08:02 PM
  #6  
GhostriderI's Avatar
Senior
 
Joined: Jan 2012
Posts: 4,463
Likes: 119
From: Pearl, MS
Default

Bet it was part of the power door lock system from an older truck (some one may have changed the door)

Last edited by GhostriderI; Nov 9, 2015 at 08:04 PM.
Reply
Old Nov 10, 2015 | 07:28 AM
  #7  
Chris_1's Avatar
5 Year Member
10 Year Member
iTrader: (1)
 
Joined: Mar 2014
Posts: 5,811
Likes: 712
From: Ontario, Canada
Default

If it goes to the key cylinder, it's for an alarm/disabler system.
Mine has the alarm disable option from the factory.
If you don't have that, you don't need that wire, I wouldn't think.
Reply




All times are GMT -4. The time now is 09:51 AM.