I have learned recently that a rear window from an F-Series up to a 96 will fit my 75 F-250. My question is if anybody in this part of the forum knows where to locate a rear slider with a single center pane VS a double canter pane? I prefer the cleaner look of the 3 piece glass.

 

So I'm guessing they don't exist?

 

just get a custom piece cut, I only seen 3 piece rear winodws on the powered windows, i think the 8th and 9th gen where all 4 piece.
go to a local glass shop that does car windows and ask them to cut you a Piece to fit in the rail of your 1975 f250. probably cost 20 bucks if that. pop out your 4 piece window take out the 2 windows and put in the one.
as for the1987-1996 f150 window i dont think they will fit at all the cab style is different.

 

They fit, 73-96 are all interchangeable, I didn't believe it at first but I saw a writeup and it fits and looks great. I thought of that but my concern was getting it to seal up and latch

 

Hmm learn somethin new everyday! I just thought 80-96 were interchangable

 

And then you'd be trying to slide a 20" piece of glass in to a 10" channel with no way to lock it.
Buy this, it'll fit. They also make a power slider.
http://www.crlaurence.com/crlapps/sh...lID=1512&pom=0

 

Looks like I'm getting a power slider! Thanks for the info.

 

Just in case you need it....http://www.crlaurence.com/crlapps/sh...lID=1527&pom=0

 

Couldn't buy directly from them. Here's the best priced dealer I've found so far in case somebody else is interested in one
http://www.truckininstyle.com/latemodelsliders.htm