Ok, I got a new 4x4 engage motor. A friend bought a 93 bronco and this new motor was in the center console. I installed it this evening and I still don't have 4 wheel drive. I have looked at the manual and checked all fuses that I thought pertained to the subject. When I push the button I can hear a click, but no light. Drive around block and push button. Nothin.. Anything I can check or try that a normal guy can accomplish?

 

First you have to make sure that the motor actually works when it does get power.
Then you have to make sure it is getting power when you push the button.
Could be as simple as a faulty switch - or a wiring problem.