Topic Sponsor

Replacing brake lines

Thread Tools
 
Search this Thread
 
Old Sep 23, 2016 | 10:41 PM
  #1  
IG84's Avatar
Thread Starter
Junior Member
 
Joined: Jun 2016
Posts: 20
Likes: 0
Default Replacing brake lines

I'm replacing both rear (left and right lines from drums to diff) lines on my 92 f150 4x4 short box and was wondering what size the lines are 3/16? And flare?
Thanks!
Reply
Old Sep 28, 2016 | 07:29 AM
  #2  
exhdo1's Avatar
Member
 
Joined: Dec 2010
Posts: 37
Likes: 2
From: NJ
Default

I'm replacing the rear line (from T block to right side caliper) today. I have an 02 F-150. The line looks like it's 3/16 and the flare that goes into the T block is a double flare. It would have been easier if I could just buy the line pre made but I can't find it anywhere. I know in the past, I needed to make a repair on the front brake lines and one of the fittings was a bubble flare. If I remember correctly, Ford only used the bubble flare on some of the front lines.

Last edited by exhdo1; Sep 28, 2016 at 07:46 AM.
Reply




All times are GMT -4. The time now is 08:34 AM.