Junkyard 6inch lift... Thanks dad
#1
Member
Thread Starter
Junkyard 6inch lift... Thanks dad
Dad bought me a lift from a junkyard for a 1995 f150 4x4 5.0. It looks great but running into some issues. First of all I CANNOT FOR THE LOVE OF ALL THAT IS HOLLY get this thing to be in alignment. No shops will do it because the degree is so off. Also I asked a local off road shop on what do to for the rear (only pulled front of lift) and they told me to put 2 inch blocks in the rear because ford came with stock blocks. I was always told growing never to stack blocks to blocks on the axle. Any opinions on this?
#2
Dodge+Ford = always ready
get blocks, your stock block should be 2" so get a 4" i installed a rough country lift on my 250 and they had me stack blocks in the rear, but they are small blocks. you can also get add-a-leafs for the rear.
any pictures of how your truck sits now?
any pictures of how your truck sits now?
#3
Member
Thread Starter
Stock is 2 inch and aftermarket is 2 inch so that's the 4 inch in the back but here's the thing.... My dad thinks it's a four inch lift... I think it's a 6 inch... We both have no idea lol I will try to find a pic
#5
Mark
iTrader: (1)
I'll bet the truck that the lift came off of was badly damaged and the lift cross member was probably damaged also...
#6
Member
Thread Starter
I'm running 31 tires and will upload pics tonight. I pulled lift off broncho. It had no damage just blown head gasket. Whoever junked it was actually quite dumb it had everything done to it.