Ford F150 Forum - Community of Ford Truck Fans

Topic Sponsor

Hardware Question

Thread Tools
 
Search this Thread
 
Old Jan 26, 2015 | 03:30 PM
Share
  #1  
Migs7's Avatar
Migs7
Thread Starter
Senior Member
 
Joined: Dec 2010
Posts: 200
Likes: 11
Default Hardware Question
Will the bolts and nuts from a 2WD 1987 F150 fit/work with the 4x4 parts that im swapping into the 2wd truck?
Reply
0
Old Jan 27, 2015 | 12:07 AM
Share
  #2  
Migs7's Avatar
Migs7
Thread Starter
Senior Member
 
Joined: Dec 2010
Posts: 200
Likes: 11
Default
Pivot bolts, radius arms, and coil bucket bolts.
Reply
0
Old Jan 27, 2015 | 10:27 PM
Share
  #3  
Chris_1's Avatar
Chris_1
5 Year Member
10 Year Member
iTrader: (1)
 
Joined: Mar 2014
Posts: 5,811
Likes: 712
From: Ontario, Canada
Default
The bolt that holds the radius arm to the Ibeam and holds the spring won't work, the traction beam has a little different thing going on there because the driveshaft goes through at that spot.
Reply
0
Old Jan 27, 2015 | 10:33 PM
Share
  #4  
Chris_1's Avatar
Chris_1
5 Year Member
10 Year Member
iTrader: (1)
 
Joined: Mar 2014
Posts: 5,811
Likes: 712
From: Ontario, Canada
Default
read jankog0827's post just below yours.
Reply
0
Back to Subforum
Suspension & Brakes
View Next Unread
New Struts after Moog cc844 levelling.




Advanced Search

All times are GMT -4. The time now is 08:52 PM.