1994 f150 4x4 xl Can some please tell me what might be going on I installed the inner and out races put inner bearing in then seal put the assembly on axle put in outer bearing then inner lock nut tighten down to 50ft lbs backed off 90 degrees tighten back down to 20lbs put on lock washer
outer locking nut tighten to180lbs wheel would not turn pulled all apart If 180 lbs went right threw to back bearing could I have damaged some thing. as in to heavy seating load also how much grease should there be in the Cavity area between both the bearing races .
Thanks Bill

 

There is no advantage to breaking up one topic into several threads.
https://www.f150forum.com/f88/bearin...cement-453702/