LED headlight bulbs???
11-02-2018, 05:13 PM
#301
OK I have to apologize I have not read through this entire post, but does anybody know the diameter of the dust boot cover for the headlight low beam? I measure in about 87 mm with mine. I can order 80s or 90s off of Amazon just curious what you guys are ordering. Thanks
11-02-2018, 05:33 PM
#302
OK I have to apologize I have not read through this entire post, but does anybody know the diameter of the dust boot cover for the headlight low beam? I measure in about 87 mm with mine. I can order 80s or 90s off of Amazon just curious what you guys are ordering. Thanks
11-02-2018, 05:36 PM
#303
I installed the DeAutoKey H7rc kit yesterday https://10carbest.com/led-headlights-bulbs The package was missing some instructions, but the customer service response to email requests for guidance was outstanding. It’s quite the PIA to install the driver side due to difficulty reaching into the housing, but if you understand how the bracket secures the bulb internally (Ie understand the orientation) you will figure it out. Otherwise pretty easy to install. I put my ballasts on the outside.
The light is much whiter than the original lights - I purchased the 5000k model. I’m not sure they are tons brighter, but the whiter tone definitely lights up the road better. Overall, a little expensive, but happy with the purchase and think it is worth the upgrade.
I like to watch cognitive videos and reviews on youtube, leave one of them here, hope for somebody it will be useful.
https://www.youtube.com/watch?v=QcDq2SJyuZI
The light is much whiter than the original lights - I purchased the 5000k model. I’m not sure they are tons brighter, but the whiter tone definitely lights up the road better. Overall, a little expensive, but happy with the purchase and think it is worth the upgrade.
I like to watch cognitive videos and reviews on youtube, leave one of them here, hope for somebody it will be useful.
https://www.youtube.com/watch?v=QcDq2SJyuZI
11-02-2018, 05:37 PM
#304
80s. This is what I used. You need to stretch them to 83mm. So I would buy these exact ones and not some harder rubber POS for few a few bucks cheaper.
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
11-15-2018, 11:18 AM
#305
Senior Member
Tomall dust cover on Amazon,
More size options. I used 85mm on my 2017XL stock halogens when installing Supernova V.3 LED. Fit fine and stayed in place since last year. I know several who used 83. Not saying 80 will not work, but I did go thru the wheel wells for initial install. If you remove the reflector housing you have more to work. KM
Last edited by 2017bluetruck; 11-15-2018 at 02:19 PM.