When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have a 2016 F150(Canadian so DRL is enabled). How do I wire the Alpharex so the LED DRL work? If I wire them as shown in manual it does not work. Thank You
I have a 2016 F150(Canadian so DRL is enabled). How do I wire the Alpharex so the LED DRL work? If I wire them as shown in manual it does not work. Thank You
Are you sure you got the correct headlights with the harness that allows for DRL and switchback?
You should have a harness containing a positive wire and negative wire, plus an additional wire that taps into the fusebox (cant remember the number slot...its just an accessory power slot).
Installed the AR Pros and had the DRL on the DS go out on me. I'm guessing it's a fuse or relay but I can't find a bad fuse. I have a video of it going out. Wish I could share. Made sort of a popping noise after I started up the truck, then the DRL went out. All other lights function normally. Attached are pictures of right before and after it happened. Note that only one side installed. Passenger side is my old lights.
Anyone have any idea of what it could be/which fuse should I be checking?
Also, I didn't install AlphaRexs provided harness. It appeared my truck already had a harness that ran the DRLs on the existing lights. Maybe that's that problem.
Install Alphas harness for Alphas headlights. Upload any videos you have to Youtube and post a link here.
It's an optional harness though isn't it? I shouldn't need the harness if i don't want the DRLs to run at all times, right? Why would it kill just one side only? The running lights don't work at all no matter what setting I have it on. Seems like no power supply. I'm going to pull the terminals off the battery and to hard reset. I plan to install the harness while the battery is disconnected. Will post an update.
