pudge12

Did some searching and found a lot of overwhelming and scattered information. Is there a nice, condensed list somewhere that will list all the bulbs in the F150 and their LED equivalent? Looking to get started piecing some LED's together for both the interior and any exterior bulbs that aren't already LED. Also, does anyone have any experience with F150leds.com 's ambien lighting kit? Seems to be the only kit I've come across. Thanks for the help.

elricfate

I usually use the Sylvania bulb finder but given that yours is a 2017 and they only have up to 2016 model years on there, I am unsure.

230748

On our site (www.4x4TruckLEDs.com) we actually have a VEHICLE SPECIFIC section which shows you which bulbs to get... however we have not added the new CL70 or CL90 bulbs yet... you can use this list though for your 2017 and then go to our site under REPLACEMENT BULBS and buy them all. We sell our own brand of VERY high quality LED lights (headlights and replacement bulbs):

Front Indicator: 194, Amber (Pair)
Front Turn Signal: 7443, Amber (Pair)
3rd Brake light: 194, Red (Single Bulb)
Cargo Lights: 921, White (Pair)
License Plate Bulbs: 194, White (Pair)
Rear Turns: 3157, Red (Pair)
Rear Brakes (same bulb as the Turns on a 2015+ truck)
Reverse: 3156, White (Pair)

Here is my own chart I put together which is 1997-2017:

pudge12

Awesome, I'll take a look at your site. Do you guys offer an ambient light kit?
Thanks

230748

No kit for that because it'd be too vehicle specific. We sell mostly items you can see on the shelf of any high-end truck accessory store (so a F150 ambient lighting specific kit wouldn't sell, except to a select market).

We do have LED Strips, which are universal in different lengths that you can wire in. There is a category on our site called LED STRIPS

pudge12

Great. Do I need a harness to change my low beams to LED? or is it just the bulb?

230748

If your truck has OEM LEDs in the headlights from the factory, you can't change them out.

But if you have halogen lights then you can replace them.

Check out the vehicle specific section and you'll see our LOW Beam and HIGH beam (and FOGS) kits. Our Ballast Relocation kits, which is an option, are necessary for the 2015+ trucks and we're the only ones who offer this for the 2015+ trucks (we put it together because we knew what was involved).

It basically is a kit that includes instructions, extension wires, silicone and rubber boots so you can install LED bulbs in your halogen housings. It's an option because some people source the parts themselves but MOST of our customers who buy our LED kits for their headlights and have a 2015+ truck, add this option on.

Also we recommend putting the CANBus adapters on as well during installation to stop flickering of lights