101 ways to mount your Rigids! - Presented by TAP Auto and goneFXcrazy
#31
Member
Thread Starter

Good stuff guys! New and interesting setups. Remember this thread is to collect as many different ways of doing it. For the sake of avoiding redundancy, unless your setup hasn't been featured yet, don't post it!
Last 2 guys, I like your trucks!
Last 2 guys, I like your trucks!
#32
Senior Member
#33
Member
Thread Starter

A few options, you could put a Dually/D2 in each hole, maybe you can fit some 4" E series in there, again one in each hole.
On the other hand you could just remove it entirely... That would open up your options greatly.
If yours is an EcoBoost and you're worried about blocking airflow, you do what I did. An SR20 in that opening leaves PLENTY of space for airflow.

On the other hand you could just remove it entirely... That would open up your options greatly.
If yours is an EcoBoost and you're worried about blocking airflow, you do what I did. An SR20 in that opening leaves PLENTY of space for airflow.


The Following User Says Thank You to goneMINIcrazy For This Useful Post:
Total Automotive Performance (09-25-2014)
#34
Member
Thread Starter

Updated again. I will continue to update the list, but updates don't bring it up in your subscriptions so check back every now and then to see if there were changes or additions.
#35
F150 Vendor

iTrader: (3)

That 20" is perfect!! Looks like it was meant for it. TAP Auto Parts is stocked up!! We have all the F150 & Raptor specific mounts as well as the new SR2 & E2 lights all on the shelf.
__________________
TotalAutomotivePerformance.com - Your Ford Upgrade Headquarters!
Contact Us by Phone at 702.979.1577 or via Email at [email protected]
We have the best pricing on upgrades! From ARB, Rigid, Baja Designs, ICON, King, Bilstein, Fox & More
TotalAutomotivePerformance.com - Your Ford Upgrade Headquarters!
Contact Us by Phone at 702.979.1577 or via Email at [email protected]
We have the best pricing on upgrades! From ARB, Rigid, Baja Designs, ICON, King, Bilstein, Fox & More
#36
Senior Member

here are how i have them mounted, the four spot lights are now on my headache rack
IMG_0319 by kevinstuparyk, on Flickr
Untitled by kevinstuparyk, on Flickr
Untitled by kevinstuparyk, on Flickr
Untitled by kevinstuparyk, on Flickr
IMG_9887 by kevinstuparyk, on Flickr
IMG_0247 by kevinstuparyk, on Flickr
IMG_0254 by kevinstuparyk, on Flickr
IMG_0255 by kevinstuparyk, on Flickr








Last edited by kevin7898; 06-11-2014 at 09:22 AM.
#37
F150 Vendor

iTrader: (3)

__________________
TotalAutomotivePerformance.com - Your Ford Upgrade Headquarters!
Contact Us by Phone at 702.979.1577 or via Email at [email protected]
We have the best pricing on upgrades! From ARB, Rigid, Baja Designs, ICON, King, Bilstein, Fox & More
TotalAutomotivePerformance.com - Your Ford Upgrade Headquarters!
Contact Us by Phone at 702.979.1577 or via Email at [email protected]
We have the best pricing on upgrades! From ARB, Rigid, Baja Designs, ICON, King, Bilstein, Fox & More
#39
Senior Member

#40
Senior Member


Thought I would add what I did for my reverse lights.
I did have Duallys mounted to rear shackles in flood version. Plenty bright but not much spread of light and I didn't like them hanging from the bottom.
I have since cut into my bumper and flush mounted diffused SRQ2 lights.
Yes, I'm the same idiot who cut my 2013 FX4 grill to add the SR 30" bar on the top of the grill posted earlier in this post.
I also took the Duallys I previously had for reverse lights and mounted in my factory fog lights. (don't have a pic of this but everyone has seen these mounted like this)

I did have Duallys mounted to rear shackles in flood version. Plenty bright but not much spread of light and I didn't like them hanging from the bottom.
I have since cut into my bumper and flush mounted diffused SRQ2 lights.
Yes, I'm the same idiot who cut my 2013 FX4 grill to add the SR 30" bar on the top of the grill posted earlier in this post.
I also took the Duallys I previously had for reverse lights and mounted in my factory fog lights. (don't have a pic of this but everyone has seen these mounted like this)



The Following 2 Users Say Thank You to dannytexas For This Useful Post:
2010_BlackBison (06-25-2014), PlatinumCarioca (07-14-2014)