factory brake controller ?
HI I need to install a controller in my 2013 and I usually go with Tekonsha but I noticed on a ford web site somewhere you can buy the factory unit.
I do have the factory receiver hitch and 4/7 pin so might this be a near plug-n-play option ?
thanks
I do have the factory receiver hitch and 4/7 pin so might this be a near plug-n-play option ?
thanks
Grumpy Old Man
Joined: Nov 2011
Posts: 3,129
Likes: 887
From: Midland County Texas, just west of the star in my avatar
You can buy the ITBC from any Ford dealer, but if you want to save a buck then try this discount Ford parts dealer:
https://parts.autonationfordwhitebea...0wbC12OC1mbGV4
The description says "Vehicles W/ Tow/Max". That means it's for all F-150s that have either the regular tow pkg or the max tow pkg.
You need a 7mm socket, remove the cover that holds in your plastic bezel for gauge cluster. The right side vent then should pop off with some light prying. Behind that area should be the harness. Remove your coin tray that resides in that spot and the BC should fit in.
I also ordered an OBD adapter to work with Forscan so I can enable the controller myself. That was only $29.99 for a USB version. Dealer wanted 1 hour labor to install the controller and 1 hour labor to update software. Total $225 labor.
Trending Topics
I liked the Tekonsha p2 I used in my last truck (Toyota Tundra) But this factory IBC worked flawlessly in my first tow about 20 miles to get the yearly inspection. Maybe someone near you (another member) can activate it for you!
Good Luck
Good Luck
This worked for me and I was also able to get it for 70$ on my 2015 f150
Originally posted by - StangMan04
Ebay has a $15 off $75+ for Ebay Motors. I was able to snag the controller for $70 after that coupon (MOTORS18). Coupon is good until 5/31.
https://www.ebay.com/itm/18324641716...m=183246417169
Originally posted by - StangMan04
Ebay has a $15 off $75+ for Ebay Motors. I was able to snag the controller for $70 after that coupon (MOTORS18). Coupon is good until 5/31.
https://www.ebay.com/itm/18324641716...m=183246417169
I was going to install the Prodigy 3 but decided at the last minute to add the Ford ITBC at the dealer... they charged me $330 (USD) for parts & labor. I like to do my own work and this was a bit pricey for me but I didn't trust myself to not break the plastic bezel.
Good luck with your install!
Good luck with your install!







