Topic Sponsor
Towing/ Hauling/ Plowing Discuss all of your towing and/or cargo moving experiences here.

Brake Controller not working

Thread Tools
 
Search this Thread
 
Old May 23, 2022 | 08:50 AM
  #1  
diller33's Avatar
Thread Starter
Junior Member
 
Joined: May 2022
Posts: 2
Likes: 0
Default Brake Controller not working

Hi. I installed a new aftermarket controller from E-bay on my 2017 f-150 XLT a week ago. I enabled the two items using forscan. Yesterday I hooked up my 20' travel trailer and the brake wont work. I get a no trailer connected message on the display. I do get a gain readout on the dash when I squeeze the controller. The lights all work on trailer, just no 12v power or power on the blue elec brake wire. I can't detect any braking power while driving.I checked the fuses and all seem to be present and good. I plan to go to the dealer and buy the OEM switch and install that as many have posted may be the problem. Also when programming, I had a third setting, Trailer Brake Module showing disabled. I tried to enable this and get an error writing blocks failed, incompatable configuration? So I had to leave this one disabled.
Any comments what my problem may be? I will post what result I have. Thanks for your help.
Reply
Old May 23, 2022 | 09:22 AM
  #2  
Joe Fournier Jr's Avatar
Senior Member
5 Year Member
Photogenic
 
Joined: Apr 2020
Posts: 185
Likes: 69
Default

I’m thinking you got a bad controller. I just did my 16 a few weeks ago and used a ford controller without any issues. I only had to enable the 2 in forscan. Good luck
Reply
Old May 23, 2022 | 09:47 AM
  #3  
fleet man's Avatar
Junior Member
 
Joined: Jan 2020
Posts: 21
Likes: 2
Default

there are some trucks that did not have the fuse's. missing fuse and a possible a relay check your owners manual for locations.
Reply
Old May 23, 2022 | 04:03 PM
  #4  
diller33's Avatar
Thread Starter
Junior Member
 
Joined: May 2022
Posts: 2
Likes: 0
Default

Well, today I bought an OEM brake controller from the Ford dealer in Ann Arbor Mich. ( Part # JL3Z-2C006-AA ) I installed it in the dash and it now works. It shows trailer when plugged in, gain on the Bar graph both when you push the pedal and using the manual control. The `12V power pin now powers and charges the trailer battery when the engine is running. It shows trailer disconnected when you unplug it. I will now have to hook up and drive it to calibrate the intensity and gain as the owners manual and as others on this forum describe how to do. Thank you all on this forum for the info provided.
Reply
Old May 23, 2022 | 04:44 PM
  #5  
MikeD134's Avatar
5 Year Member
5 Year Member
Liked
Loved
Community Favorite
 
Joined: Feb 2019
Posts: 2,645
Likes: 1,341
Default

The moderators should post a sticky to count how many folks have had issues with 3rd party brake controllers that were resolved 100% when they bought the OEM.

My guess you're the 19th- 20th person......just in the past 3 years
Reply




All times are GMT -4. The time now is 04:22 PM.