SPOAT's Regular Cab
02-01-2019, 07:33 AM
#51
Senior Member
Thread Starter
The lids are lockable. The actual cases have a hole in the mounting bracket so you can add you own padlock to lock them to the truck.
If you don't lock them to the truck, someone could just lift them out and run away with one.
The lids are not, I repeat, not, high security. You could pop one open with a pry bar. The swing cases are designed to go under a tonneau.
If you don't lock them to the truck, someone could just lift them out and run away with one.
The lids are not, I repeat, not, high security. You could pop one open with a pry bar. The swing cases are designed to go under a tonneau.
02-04-2019, 01:32 PM
#52
Senior Member
Thread Starter
Yes, kinda likin' the headlights.
The following 6 users liked this post by SPOAT:
Bruin8 (08-03-2019),
Firerunner (02-04-2019),
nubbins_ (02-05-2019),
OCMike (02-04-2019),
RMK850 (02-27-2020),
and 1 others liked this post.
02-04-2019, 09:32 PM
#53
TOTM Sept. '18
iTrader: (1)
Hey...Congrats on your new assignment. Maybe this is old news, I just noticed it.
Mike
Mike
02-05-2019, 12:54 PM
#54
Senior Member
Thread Starter
Thx Mike, Esteemed Member of the Fraternity of TOTM Winners. Bow and Nod Head.
Sorry im late here. To busy moderating to get to my stuff.
Yes, The Honorable Lenn Knighted me on the tenth of January. I can’t believe you didn’t hear the earth shake.
Pecked out on my iPhone.
Sorry im late here. To busy moderating to get to my stuff.
Yes, The Honorable Lenn Knighted me on the tenth of January. I can’t believe you didn’t hear the earth shake.
Pecked out on my iPhone.
The following users liked this post:
OCMike (02-05-2019)
02-11-2019, 01:57 PM
#55
Senior Member
Thread Starter
Random Shots
Random Shots..............
windy day
with new headlights
windy day
with new headlights
The following users liked this post:
SPOAT (02-12-2019)
The following users liked this post:
SPOAT (03-05-2019)
03-06-2019, 11:43 AM
#58
Senior Member
Thread Starter
Small Stuff
Really too cold to do anything. It's still below freezing, so I did some things that I've been putting off.
Purchased a cell phone holder from Amazon. Click . I saw it noted somewhere here on the forum. It's attached with tape, so I hope it will hold. If not, and I like it, I may shoot some screws through the hidden side.
I let the dashboard heat a while in the bright sun. Seems to be holding so far. They include a lot of extra adhesive tape for future use.
My Better Built crossover tool box will leak water if you run it through a carwash. I purchased a Truxedo tailgate seal, removed the thin factory seal, an applied the tailgate seal. It did fix the problem and no more high pressure leak.
Purchased a cell phone holder from Amazon. Click . I saw it noted somewhere here on the forum. It's attached with tape, so I hope it will hold. If not, and I like it, I may shoot some screws through the hidden side.
I let the dashboard heat a while in the bright sun. Seems to be holding so far. They include a lot of extra adhesive tape for future use.
My Better Built crossover tool box will leak water if you run it through a carwash. I purchased a Truxedo tailgate seal, removed the thin factory seal, an applied the tailgate seal. It did fix the problem and no more high pressure leak.
The following users liked this post:
maddog1949 (10-06-2021)
03-07-2019, 07:08 PM
#59
Senior Member
Thread Starter
So far the phone holder works well. Good location, away from the dog.
Shakes just a bit. Had to put blue lock tight on the screw.
Pecked out on my iPhone.
Shakes just a bit. Had to put blue lock tight on the screw.
Pecked out on my iPhone.
03-13-2019, 01:43 PM
#60
Senior Member
Thread Starter
Got pollen?
