SDDesigns 2018 SCrew XLT 4X4 5.0 Supercharged "50WOT"
#472
Senior Member
The license plate assemblies are a nice touch. I keep meaning to add this to mine but it keeps getting pushed back. The F250 version is way better than the F150 version.
#473
Doesn't matter!
Thread Starter
#474
Are the license plate lights a direct fit? Ive had those sitting in my garage for around a year and never touched them. I think i remember reading a while back that you need to do some trimming to make them work. Do you happen have any night time shots? Thanks
#476
Doesn't matter!
Thread Starter
They do need a little trimming on the step pad openings, I used a Dremel. I'll have to get the night shot tomorrow night. I'll see if I can get a trimmed shot too.
The following 2 users liked this post by sddesigns:
johnday in BFE (04-11-2019),
Summers22 (04-11-2019)
#477
Doesn't matter!
Thread Starter
The tools used.
The previous picture when I originally replaced the OEM bulbs to LED last September, the light reflected all the way up to the handle with the backup camera.
Now with the F250 assemblies installed, just a small triangle of light up to the recess of the F150 letters.
The following 4 users liked this post by sddesigns:
#478
Senior Citizen Member
Join Date: Dec 2017
Location: Outside city limits TN
Posts: 4,347
Received 2,707 Likes
on
1,548 Posts
Looks much better with the new lamps. I’ll bet you’re getting a clearer image from the camera at night also, less glare?
#479
Doesn't matter!
Thread Starter
Thanks, Mike it wasn't really that bad until it wasn't there anymore if you know what I mean, not that I ever had any problem seeing like you said clearer.
#480
Doesn't matter!
Thread Starter
I also had a visit from the big brown truck too, it came too late to get it installed tonight for tomorrows meet down at Englishtown. This will be the third vehicle I've had this setup on.
The following users liked this post:
johnday in BFE (04-12-2019)