Project Fordplay Build Thread
#1
Project Fordplay Build Thread
So I didn't just start this build its been just under a year of progress, I bought a 2006 Ford F150 XLT Screw Short Box. This is my first truck, ill get you all caught up.
The day I got her
Installed some AVS visors
Got a custom brush guard built up, ordered some 3" Led cubes, and done up a hood deflector with red "fordplay" on it, and some little red led strips on inside of headlights.
The day I got her
Installed some AVS visors
Got a custom brush guard built up, ordered some 3" Led cubes, and done up a hood deflector with red "fordplay" on it, and some little red led strips on inside of headlights.
#4
Did a light blackout of the tail lights. didn't want to go too dark to try and keep cops off my butt
Threw a tailgate Led bar in
Replaced all bulbs in truck with Led bulbs from Diode Dynamics, the 3rd brake, taillights, red license plate leds, 400 lumen reverse bulbs, cargo light bulbs (Forgot to order 2, later got the second one), Front switchback signal lights, side marker leds, and interior bulbs.
Gettin' stuck in sand
Threw a tailgate Led bar in
Replaced all bulbs in truck with Led bulbs from Diode Dynamics, the 3rd brake, taillights, red license plate leds, 400 lumen reverse bulbs, cargo light bulbs (Forgot to order 2, later got the second one), Front switchback signal lights, side marker leds, and interior bulbs.
Gettin' stuck in sand
#6
#7
I did a rocker panel with the same rock guard used for bumpers (Yes I cleaned the painted area)
Threw in some Anzo USA projector headlights combined with high and low 8000K HIDs
Cops were bugging me about tires sticking out too far so I purchased some smittybilt 1.5" fender flares, I eventually coated them with rock guard to match everything else.
Threw in some Anzo USA projector headlights combined with high and low 8000K HIDs
Cops were bugging me about tires sticking out too far so I purchased some smittybilt 1.5" fender flares, I eventually coated them with rock guard to match everything else.
Trending Topics
#8
Finally leveled the truck with a 3" in the front.
Replaced all my brakes and rear rotors, both lower control arms, all ball joints, replaced tie rod ends.
Finally made it so she sounded like she had a bit of ***** with a 3" piping going in and out of a flowmaster super 44 series muffler.
Did my own headlight build and installed some red oracle halos to set her off. also installed some LED side Bolts from Onzium.com to screw in and make some raptor style look.
and some 6000K High/low HIDs, and threw on some new 285/70/r17 goodyear duratracs to run in winter.
Replaced all my brakes and rear rotors, both lower control arms, all ball joints, replaced tie rod ends.
Finally made it so she sounded like she had a bit of ***** with a 3" piping going in and out of a flowmaster super 44 series muffler.
Did my own headlight build and installed some red oracle halos to set her off. also installed some LED side Bolts from Onzium.com to screw in and make some raptor style look.
and some 6000K High/low HIDs, and threw on some new 285/70/r17 goodyear duratracs to run in winter.
#9
And the latest feature, I ordered some Led taillights for my trucks, the brand is Spyder and ordered off of CarID.
Mods I want to get next
-Led 3rd brake light
-Get wheels custom painted
-Get some 35" mud terrains (Not sure which brand)
-Upgraded Upper Control Arms
-Custom 4x4 decals
-Rock lights
-Havent decided yet between a NFAB Prerunner bumper or a Iron cross/Road armour bumper
-Headers
-Either 4 mounted round led lights on headache rack or 50" lightbar for roof.
Mods I want to get next
-Led 3rd brake light
-Get wheels custom painted
-Get some 35" mud terrains (Not sure which brand)
-Upgraded Upper Control Arms
-Custom 4x4 decals
-Rock lights
-Havent decided yet between a NFAB Prerunner bumper or a Iron cross/Road armour bumper
-Headers
-Either 4 mounted round led lights on headache rack or 50" lightbar for roof.