JCROUCH'S Oxford White 2018 XLT
#61
Custom Expeditionish Bumper Progress
Original photoshop that got the wheels spinning..
Valance and bumper cut and merged.. still a lot left. Obviously need to clean up the entire seam and repaint.. waiting on the Expedition air ducts and fog lights to show up too.
Valance and bumper cut and merged.. still a lot left. Obviously need to clean up the entire seam and repaint.. waiting on the Expedition air ducts and fog lights to show up too.
Last edited by JCROUCH; 06-02-2020 at 02:41 PM.
The following 8 users liked this post by JCROUCH:
1995GreenMachine (06-02-2020),
Brick'S hithouse (07-10-2020),
CrankCase (06-02-2020),
jcfountain33 (06-03-2020),
Johnny_bravo00 (06-03-2020),
and 3 others liked this post.
The following users liked this post:
JCROUCH (06-27-2020)
The following 7 users liked this post by JCROUCH:
1995GreenMachine (06-15-2020),
Bubbabiker (06-20-2020),
CrankCase (06-15-2020),
jcfountain33 (06-15-2020),
Johnny_bravo00 (06-15-2020),
and 2 others liked this post.
The following users liked this post:
JCROUCH (06-27-2020)
The following users liked this post:
JCROUCH (06-27-2020)
The following users liked this post:
JCROUCH (06-27-2020)
#68
Wheel, Tire and Suspension Specs:
18x10 Black Rhino Raze, -44 Offset, 3.75" Backspacing
LT325/60R18 Nitto Ridge Grappler
Front Suspension: Stock 4x4 height
Rear Suspension: Rear block removed and 2" Crown Lowering Shackles (~3.5" drop total, almost perfectly level all around).
Old setup:
17x8.5 American Racing Patrol 0 offset 4.75" backspace
P285/70R17 Cooper Discoverer AT3
1.5" Fred Goeske Wheel Spacers
Stock 4x4 suspension with rear block removed
#69