J.Walton introduction/ build thread.
07-19-2012, 07:16 AM
#161
Senior Member
As long as you get the led strips that are waterproof you will be fine.
I used 3m foam automotive tape, peeled one side and stuck it to the ( also sticky) back side of led strip. Then stick the back to a cleaned frame rail. I used oil/ grease remover and cleaned the frame, then just stuck the stuff to it. Been about 4-5 months with no issues. I used just the LEDs in te bed. All the rolls come with a 3m sticky back so all you do is stick it to it!
I used 3m foam automotive tape, peeled one side and stuck it to the ( also sticky) back side of led strip. Then stick the back to a cleaned frame rail. I used oil/ grease remover and cleaned the frame, then just stuck the stuff to it. Been about 4-5 months with no issues. I used just the LEDs in te bed. All the rolls come with a 3m sticky back so all you do is stick it to it!
07-21-2012, 02:58 PM
#162
Crawl under your truck, look at the frame rail or eather side, I started about where the frame gets straight going towards the back and went all the way to the mouth for the front of the leaf spring. Place them to the inside of the frame rail so that they are harder to be seen
09-25-2012, 12:36 PM
#163
Member
Sick truck man, that is the best looking F150 I have ever seen. I think it is the same color as mine and same body style. I want to do the Rhino liner like you did, but Im going to try and do it myself to save some money. Also want the tow mirrors...and pretty much everything else haha
