Freshly lifted 14 FX4
#1
Junior Member
Thread Starter
Join Date: Apr 2015
Location: Providence Forge, Virginia
Posts: 14
Likes: 0
Received 1 Like
on
1 Post
Freshly lifted 14 FX4
I haven't been on here in awhile, but since I got my newest truck in January, I figured I was time to document the progress somewhere other than my phones photo album. My 4th f150, but the first that I have lifted. Specs as follows.
14 FX4 sterling gray
3.5 eco
25,xxx K
Zone 6" suspension
20x9 Procomp 7031 0-offset, 5.5 BS
35x12.50R20 Mickey Thompson ATZ P3
SCT Livewire + ( 91 tune )
UWS matte toolbox
Lift was installed by Davis Off-Road here in VA, I was going to do it myself, but I decided I wanted someone to fall back on should I have any issues, and since im currently covering for 2 separate shifts at work, even paying them I still came out ahead and didn't have to crawl on my garage floor. They did a superior job, in exactly the time frame they said, and for exactly the quoted price. I highly recommend that shop if you are in central VA.
A few before and afters
14 FX4 sterling gray
3.5 eco
25,xxx K
Zone 6" suspension
20x9 Procomp 7031 0-offset, 5.5 BS
35x12.50R20 Mickey Thompson ATZ P3
SCT Livewire + ( 91 tune )
UWS matte toolbox
Lift was installed by Davis Off-Road here in VA, I was going to do it myself, but I decided I wanted someone to fall back on should I have any issues, and since im currently covering for 2 separate shifts at work, even paying them I still came out ahead and didn't have to crawl on my garage floor. They did a superior job, in exactly the time frame they said, and for exactly the quoted price. I highly recommend that shop if you are in central VA.
A few before and afters
Last edited by Thaatsriite; 03-15-2017 at 04:51 AM. Reason: typo's
The following users liked this post:
Jkry2121 (03-15-2017)
#2
Very nice truck man. Love the color, lift and toolbox.
#3
Junior Member
Thread Starter
Join Date: Apr 2015
Location: Providence Forge, Virginia
Posts: 14
Likes: 0
Received 1 Like
on
1 Post
A good friend at work has almost the exact same truck as mine. His is a 2013 with a 5.0 and a BDS 6" lift, Fuel Couplers 20x9 -5 Bs and +1 offset, 35x12.50 Toyo RT , here are both of them side by side maybe it will help someone looking at the difference in that little of an offset change. The Toyos are close to 1/2 inch taller than the mickeys.
Last edited by Thaatsriite; 03-19-2017 at 01:09 PM.
#6
Junior Member
Thread Starter
Join Date: Apr 2015
Location: Providence Forge, Virginia
Posts: 14
Likes: 0
Received 1 Like
on
1 Post
pulled the front air dam skirt off yesterday, and grabbed some rattle can flat black to touch up some spots on the rear end and control arms after I wire brush them. pulling the skirt off makes the front look a lot taller from head on IMO. still trying to get my Revs per mile dialed in with the SCT, MT says 599, I set it to 600 and its still a little off, ill have to play with it.