BoozeDaily's XLT Sport to Platinum(ish) Build
The following users liked this post:
BoozeDaily (11-16-2015)
The following users liked this post:
BoozeDaily (11-16-2015)
#23
I planned on a level/lift and talked to a few people about what would be a good size to go to. I settled on a 2.5" but I had a slight problem. The 2.5" leveled the truck out if you had a 1.25" rear block in the back. I didn't have that because I bought a 4x2. I was trying to find 1.25" stock blocks at the same time I was talking to Alex from F150lifts. He steered me in the direction of the 2.5"front/2.25" rear package from F150lifts. For ease, I got it.
I've never been a fan of the stock running boards. I always thought they looked cheesy and also served no purpose for actually getting into the truck. With the intent to lift and consideration of my vertically challenged wife and daughter, I contacted AMP to get the power boards.
Super quick turnaround, as they were here in about 3 days. Couple hours later, I had power steps again (King Ranch) and my wife and daughter were happy (which means I'm happy)
I've never been a fan of the stock running boards. I always thought they looked cheesy and also served no purpose for actually getting into the truck. With the intent to lift and consideration of my vertically challenged wife and daughter, I contacted AMP to get the power boards.
Super quick turnaround, as they were here in about 3 days. Couple hours later, I had power steps again (King Ranch) and my wife and daughter were happy (which means I'm happy)