2021 F-150 XLT Sport 4x4 build
#11
Senior Member
Thread Starter
Got a few toys back from powder coating!
DeBerti tow hooks and Anderson hitch
DeBerti tow hooks and Anderson hitch
The following users liked this post:
Quan808 (03-28-2021)
#13
Senior Member
Thread Starter
Ok got on the tow hooks and put the hitch on. Removed fender badging to paint. Took apart the Lariat grille. Will send off to auto body shop next week. Installed bull rings so I can tie down my restaurant equipment.
The following 3 users liked this post by Quan808:
#14
Senior Member
Thread Starter
Last edited by Quan808; 03-28-2021 at 05:05 AM.
The following 2 users liked this post by Quan808:
Collin McCullick (04-20-2021),
DVickers (12-20-2021)
#16
Senior Member
Thread Starter
I have been in Texas on a fishing trip so finally got a chance to wash the truck.
Took apart the fender badges for paint. Terrible at the rattle can, but trying to be careful because it’s so humid in Hawaii.
Took apart the fender badges for paint. Terrible at the rattle can, but trying to be careful because it’s so humid in Hawaii.
The following 2 users liked this post by Quan808:
BigShan808 (04-26-2021),
sddesigns (12-18-2021)
#17
Senior Member
Thread Starter
Had a member ask about removal of the fender badges.
I used plastic pry tools. Here is a picture of the 5 tabs.
I used plastic pry tools. Here is a picture of the 5 tabs.
The following 4 users liked this post by Quan808:
#18
Senior Member
Thread Starter
Finally finished the fender badges. Will get them on tomorrow.
Lariat grill parts are back from the auto body shop.
Lariat grill parts are back from the auto body shop.
Last edited by Quan808; 04-07-2021 at 04:47 AM.
The following 4 users liked this post by Quan808:
#19
Senior Member
Thread Starter
Ok, got on the fender badges finally!
Rims will be back from powder coating in a couple of weeks.
Rims will be back from powder coating in a couple of weeks.
Last edited by Quan808; 04-27-2021 at 02:21 AM.
The following 7 users liked this post by Quan808:
DVickers (12-20-2021),
Firerunner (04-08-2021),
jayviking (04-12-2021),
ManMountainDean (04-08-2021),
mdmay62 (04-08-2021),
and 2 others liked this post.
#20
Senior Member
Thread Starter
Ok, finally got some time to play around.
Rear wheel well liners from Fairway came in and they look and fit awesome!
Rear wheel well liners from Fairway came in and they look and fit awesome!
Last edited by Quan808; 04-24-2021 at 08:37 PM.
The following 5 users liked this post by Quan808:
BigShan808 (04-26-2021),
DVickers (12-20-2021),
Firerunner (04-24-2021),
sddesigns (12-18-2021),
White17XLT (05-06-2021)