The 2016 Rally Truck Build
#41
Your Mod Superstore!
Really digging this build so far. Awesome Subie as well!
The following users liked this post:
grinthock (11-08-2016)
#44
Ok so my lights build has started... My original thought was to use the same flasher for reverse and stop - but then i'm feeding one via the other when it's off -- not important but i'm not doing it.
I have isolated the rest of the truck with 1N4007 Diodes, and then run a wire from the lights, back to the cab hiding it all up against the cab, all in split loom and then running it through a small grommet I found behind the back passenger seat (PERFECT!!)
The rest was running LOTS of wires from the battery to the back of the cab, to the headliner, and getting the Feneix 4200 Mini installed. It's working beautifully (Video coming once I am all done)
I have some delays on parts, I was going to use the TIR-3's I had sitting around, but I have decided to order new Feneix T3's instead, so those are coming, and I also didn't end up getting the Arrowstick I wanted, so I have a new one of those coming but it's also very delayed.
The initial plan was to also replace the markers in the front with hide away strobes - that's proving to be more difficult because the bulb in that hole is REALLY deep and i'm not cutting into the lights for that, i would have to dissect the entire light, so i'm back to the drawing board a bit.
I have isolated the rest of the truck with 1N4007 Diodes, and then run a wire from the lights, back to the cab hiding it all up against the cab, all in split loom and then running it through a small grommet I found behind the back passenger seat (PERFECT!!)
The rest was running LOTS of wires from the battery to the back of the cab, to the headliner, and getting the Feneix 4200 Mini installed. It's working beautifully (Video coming once I am all done)
I have some delays on parts, I was going to use the TIR-3's I had sitting around, but I have decided to order new Feneix T3's instead, so those are coming, and I also didn't end up getting the Arrowstick I wanted, so I have a new one of those coming but it's also very delayed.
The initial plan was to also replace the markers in the front with hide away strobes - that's proving to be more difficult because the bulb in that hole is REALLY deep and i'm not cutting into the lights for that, i would have to dissect the entire light, so i'm back to the drawing board a bit.
Last edited by grinthock; 11-14-2016 at 11:15 AM.