Ford F150 Forum - Community of Ford Truck Fans

Ford F150 Forum - Community of Ford Truck Fans (https://www.f150forum.com/)
-   Members Builds (https://www.f150forum.com/f78/)
-   -   2016 Platinum FX4 Magnetic Gray (https://www.f150forum.com/f78/2016-platinum-fx4-magnetic-gray-360683/)

Firerunner 01-14-2019 10:49 PM

AJ and AM are both 3.0 versions....but yes, AJ is an older file that has been replaced

DeltaNu1142 01-16-2019 10:58 AM

1/16/2019
30,262 miles

I put washer fluid in the reservoir for the first time since I purchased the truck. I added about 3 quarts of Rain-X fluid, and the reservoir wasn’t empty when I started, so I’m not sure what the capacity is.

v6procharged 01-30-2019 12:12 AM


Originally Posted by DeltaNu1142 (Post 5382612)
7/8/2017
10,xxx miles

I replaced the keypad in the driver side door trim. I thought all this time that the clip was broken; in fact, it was just missing a small metal piece that had fallen into the door when I last pulled it out. It was a huge pain to remove & replace.

I also found a small spot of surface rust on the new bumper. I sanded it down, cleaned it, and sprayed it with satin black paint.

I took inventory of the parts I need to install my grille. I'm missing only one black plastic stud retainer, and thanks to @Firerunner, I should have it soon. Here's a preview:

https://cimg7.ibsrv.net/gimg/www.f15...84026385c7.jpg

Satin black mesh and trim; the rest is Magnetic Metallic.

did u clearcoat this or just paint? And how's it holding up?

DeltaNu1142 01-30-2019 03:41 AM


Originally Posted by v6procharged (Post 6073363)
did u clearcoat this or just paint? And how's it holding up?

The shop painted and cleared it. It's holding up as well as the rest of the factory paint.

v6procharged 01-30-2019 02:53 PM


Originally Posted by DeltaNu1142 (Post 6073431)

The shop painted and cleared it. It's holding up as well as the rest of the factory paint.

word. Just doesn't look as shiny as rest of truck

DeltaNu1142 02-06-2019 08:56 AM

2/6/2019
31,334 miles

Small stuff today. Inspired by some posts in the <$50 mods thread, I grabbed a drawer handle for my console organizer. Home Depot didn’t have the black plastic ones, so I had to spring for the $3.07 brushed stainless handle. I just drilled some holes and used some #8-32 x 3/8” machine screws to fasten it on.

https://cimg9.ibsrv.net/gimg/www.f15...b54395d50.jpeg
https://cimg8.ibsrv.net/gimg/www.f15...2c991c0bf.jpeg

The screws that came with the handle were way too long to use with the organizer, but they just happened to be the exact size I needed for my trailer connector. I’ve been meaning to get that fastened right since I installed the rear bumper. It’s still not right; I need a magical 11/32” deep socket with paper-thin walls to get it tightened down. Fab Fours really didn’t think that one through.


DeltaNu1142 02-08-2019 11:17 AM

2/7/2019
31,369 miles

My engine developed a tick, on every revolution, at operating temps. I reloaded the stock tune and it went away. I reached out to OZ Tuning via email, and Ken got back to me right away. He highlighted the recent TSB # 7718, about the “typewriter tick,” and it made me feel a little better. I still don’t like the noise, but I went ahead and reloaded the tune today, 2/8/2019, with 31,406 miles.

DeltaNu1142 04-17-2019 10:23 AM

4/17/2019
33,189 miles

I have cut my commute by at least 30 miles per day, so I'm using way less gas and adding on way fewer miles. The engine tick has not returned. I replaced my engine air filter today. Shown below is the old one coming out and the new one going in.

https://cimg6.ibsrv.net/gimg/www.f15...818f2f23f5.jpg

I have a cabin filter ready to go in. I've mainly been waiting for the pollen to subside before changing filters. I've also got Mobil 1 5W-20 and a Motorcraft oil filter ready, but the oil indicator shows 8% life left and with my short drive to work it could be awhile. I'm due for a tire rotation. Hopefully this weekend I'll get to do that, along with lubricating and checking torque on front & rear suspension components.

DeltaNu1142 04-21-2019 11:41 AM

4/21/2019
33,268 miles

I rotated my tires this morning in a modified X pattern, tightened the suspension, and sprayed Fluid Film on metal parts and silicone spray on rubber boots, bushings, and lines.

I found the driver's side lower control arm front bolt loose. That was responsible for the clunks I've been hearing. I'll definitely be visiting the shop that last touched it to let them know.

rotor7911 04-21-2019 04:45 PM


Originally Posted by nubbins_ (Post 6053353)
Is -AJ an outdated version then? Sync 3 doesn't find any updates in its Automatic Updates search, but I have found and loaded -AM onto a USB file which I'll try to install once I get my truck back.

What got me initially curious was the fact that the Flex I'm driving now, images of Sync 3 in the Escape and Edge, as well as BGG's F-150 show the bottom row as having coloured buttons for each tab (Climate, Phone, Nav, etc.) and being animated slightly differently. My truck right now just has blue buttons.

Button colors in Sync 3 can be changed in Forscan. Look on the APIM page of the spread sheet.


All times are GMT -4. The time now is 08:23 PM.


© 2024 MH Sub I, LLC dba Internet Brands