Slow.

Thanks to Todd @ Aeroforce for developing this gauge for my truck, testing to follow...

CoreyMS

Nice brian.

caperJ

Question can you post which line it runs to and is the hose going to it a lot smaller did you need an adapter? As well can you show how you go the hose through the firewall and into the heater duct. I'd be a little worried that if that hose gets loose on the back of the guage it would have an ill affect on power and fuel economy, I may be incorrect.

Slow.

^ uh. what hose.

it plugs into the ALDL port. it's a 20 minute install.

NASSTY

What all does it show? I have a boost gauge and my main concern is boost and EGT's.

Olli

I like it. What is an "ALDL port" ? More details please...



Olli

willieboy

ODB port is the other name people call it. This plugs in and reads all the computer parameters. This guage is on my list for the next truck purchase.

Aeroforce Interceptor guage

Slow.

Still testing, but...

1. INTAKE AIR- Intake Air Temperature
2. COOLANT TEMP- Engine Coolant Temperature
3. TRANS TEMP - Transmission Temperature (gas powered automatics)
4. RPM- engine Revolutions Per Minute
6. FUEL LEVEL – 0-100 %
7. MANIFOLD PSI- Manifold Air Pressure (kPa)
8. BOOST/VACUUM - psi/inHg
9. THROTTLE POS PCT- Throttle Position percentage (0-100%). Will typically read around
10-90%.
11. MILES PER HOUR- Miles Per Hour
12. IGNITION ADVANCE- ignition timing advance
13. SHORT TRIM B1-short term fuel trim bank#1
14. SHORT TRIM B2-short term fuel trim bank#2
15. LONG TRIM B1-long term fuel trim bank#1
16. LONG TRIM B2-long term fuel trim bank#2
17. OXYGEN SENSOR B1-O2 bank 1 sensor in millivolts
18. OXYGEN SENSOR B2-O2 bank 2 sensor in millivolts
19. BATTERY VOLTAGE- Alternator/battery output voltage
20. ENGINE LOAD-calculated Engine Load (0-100%)
21. FUEL PUMP DUTY CYCLE
22. CYLINDER HEAD TEMPERATURE
23. Calculated Engine Torque (Auto trans)
24. TRANS SLIP 1 - Transmission slip for most 2005/2006 vehicles
28. FUEL STATUS – Displays “Open” or “Closed” to indicate open or closed loop fueling.
29. CMD EQ RAT – Commanded equivalency ratio
30. B1S1 EQ RAT – Bank 1 sensor 1 equivalency ratio
31. B2S1 EQ RAT – Bank 2 sensor 1 equivalency ratio
32. CMD A/F RAT – Commanded A/F ratio
33. B1S1 A/F RAT – Bank 1 sensor 1 air/fuel ratio
34. B2S1 A/F RAT – Bank 2 sensor 1 air/fuel ratio
35. Analog 1 – analog input #1
36. Analog 2 – analog input #2

Beta:

IAT 2
IAT2 volts
Charge air cooler temperature
Charge air cooler volts
Boost air temperature sensor volts
Knock retard
Learned knock correction
Boost desired
Fuel rail pressure
Trans temp

caperJ

Sorry thought it was a boost guage

Slow.

it's an everything gauge. well worth the $.