2014 Fx4- 5.0 making a ticking noise??
#101
So here's my senerio with my "tick".... I can start my truck up and no noise. If I go for a very short drive...say to the McDonalds or car wash less than 1/2 a mile away the tick comes on strong. It did it to me at my land. Started her up and drove down the road to the gate less than 1/4 of a mile...got out to open gate and there was the tick!! Later on that drive I stopped off at the local Buccee's and the tick was gone. It seems as long as it gets warm with a good drive there is no tick. Kinda aggravating. I did some reading on the 5.4's with a tick and some went with a higher viscosity oil and saw some results. Any thoughts....??
#102
Senior Member
I parked my truck next to my friends 2014 5.0, mines a 2012 5.0 and we both started them side by side and let them warm up and idle down. His has 16,000 and mine has almost 30,000. His does have a some light ticking too, but not quite as loud as mine. This is the passenger side I am talking about. My truck is more pronounced.
#103
So here's my senerio with my "tick".... I can start my truck up and no noise. If I go for a very short drive...say to the McDonalds or car wash less than 1/2 a mile away the tick comes on strong. It did it to me at my land. Started her up and drove down the road to the gate less than 1/4 of a mile...got out to open gate and there was the tick!! Later on that drive I stopped off at the local Buccee's and the tick was gone. It seems as long as it gets warm with a good drive there is no tick. Kinda aggravating. I did some reading on the 5.4's with a tick and some went with a higher viscosity oil and saw some results. Any thoughts....??
#104
Senior Member
FCS contacted me and was very nice and is helping with coordinating for me to take my truck back in and discuss with my service manger what steps (checks) to do to determine if i have a serious problem or not. Will have to be next week sometime due to my work hours.
#105
Senior Member
That's the same thing my truck was doing (2011), nothing when cold, but here after a little warm up, then less when completely warmed up. When they scoped my motor #4 & 5 was bad with the rings broken in # 4. They replaced with a short block and all is well now. I have about 3000 miles on the new block, still quiet.
#106
Ford Customer Service
So here's my senerio with my "tick".... I can start my truck up and no noise. If I go for a very short drive...say to the McDonalds or car wash less than 1/2 a mile away the tick comes on strong. It did it to me at my land. Started her up and drove down the road to the gate less than 1/4 of a mile...got out to open gate and there was the tick!! Later on that drive I stopped off at the local Buccee's and the tick was gone. It seems as long as it gets warm with a good drive there is no tick. Kinda aggravating. I did some reading on the 5.4's with a tick and some went with a higher viscosity oil and saw some results. Any thoughts....??
That's the same thing my truck was doing (2011), nothing when cold, but here after a little warm up, then less when completely warmed up. When they scoped my motor #4 & 5 was bad with the rings broken in # 4. They replaced with a short block and all is well now. I have about 3000 miles on the new block, still quiet.
Brittany
The following users liked this post:
Koolponycar (04-04-2015)
#108
You are right about the knock. My truck started out as a tick, and then went to a knock. When my dealer hear the knock they did the scope/tear down and found the problem.
#109
What's the model year and current mileage on your truck, Crpssfire? Your dealer is in the best position to assist with this, as they'll be able to diagnose. Please let me know if you've had them take a look at your truck.
I'm glad to hear that this has been resolved, Lew! If you have any questions moving forward, you know where to find me.
Sounds like you're in good hands with the CSM and the dealer, Koolponycar; please keep me posted! I'll keep an eye out for any updates from you.
Brittany
I'm glad to hear that this has been resolved, Lew! If you have any questions moving forward, you know where to find me.
Sounds like you're in good hands with the CSM and the dealer, Koolponycar; please keep me posted! I'll keep an eye out for any updates from you.
Brittany
#110
Stupid question, were my cam phasers replaced. Heres a list of what was done on the invoice.
2 3R2Z*6A257*DA Sensor - Camshaft Position
2 5L3Z*6268*A Belt - Timing
1 1L3Z*6L266*AA Tensioner - Timing Chain
1 XL1Z*6L266*AA Tensioner - Timing Chain
1 3L3Z*6020*DA Gasket
1 3L3Z*6020*EA Gasket
1 3L3Z*6020*FA Gasket
1 7L1Z*6584*A Gasket - Valve Rocker Arm Cove
1 7L1Z*6584*B Gasket - Valve Rocker Arm Cove
1 4L3Z*6M256*AA Chain - Timing
1 2L1Z*6K297*AA Guide
1 F85Z*6K255*AA Arm - Timing Chain Tensioner
1 F85Z*6M274*AA Tensioner - Timing Belt
1 5C3Z*9G756*AA Sensor - Fuel Injector Pressur
2 3R2Z*6A257*DA Sensor - Camshaft Position
2 5L3Z*6268*A Belt - Timing
1 1L3Z*6L266*AA Tensioner - Timing Chain
1 XL1Z*6L266*AA Tensioner - Timing Chain
1 3L3Z*6020*DA Gasket
1 3L3Z*6020*EA Gasket
1 3L3Z*6020*FA Gasket
1 7L1Z*6584*A Gasket - Valve Rocker Arm Cove
1 7L1Z*6584*B Gasket - Valve Rocker Arm Cove
1 4L3Z*6M256*AA Chain - Timing
1 2L1Z*6K297*AA Guide
1 F85Z*6K255*AA Arm - Timing Chain Tensioner
1 F85Z*6M274*AA Tensioner - Timing Belt
1 5C3Z*9G756*AA Sensor - Fuel Injector Pressur