remote start
02-10-2019, 09:39 PM
#1
Member
Thread Starter
remote start
has anyone installed their own remote start? more specifically this one: https://www.ebay.com/itm/Complete-Fa...0/112615855839
I installed it per their instructions and wiring call-outs and when it's hooked up it causes a ABS/Traction control fault for a bad steering angle sensor signal. once disconnected and code cleared everything is fine. I've had numerous discussions with their "tech support" that basically offers no support at all.
Anyway, I was hoping that someone here has installed their own and/or can send me in the right direction to get a wiring diagram for the wires that I need to tap into so I can cross-check them against what they say I need to tap into. I'd really like to install this myself and not take it to someone if possible.
Thank you!
I installed it per their instructions and wiring call-outs and when it's hooked up it causes a ABS/Traction control fault for a bad steering angle sensor signal. once disconnected and code cleared everything is fine. I've had numerous discussions with their "tech support" that basically offers no support at all.
Anyway, I was hoping that someone here has installed their own and/or can send me in the right direction to get a wiring diagram for the wires that I need to tap into so I can cross-check them against what they say I need to tap into. I'd really like to install this myself and not take it to someone if possible.
Thank you!
02-10-2019, 09:59 PM
#2
has anyone installed their own remote start? more specifically this one: https://www.ebay.com/itm/Complete-Fa...0/112615855839
I installed it per their instructions and wiring call-outs and when it's hooked up it causes a ABS/Traction control fault for a bad steering angle sensor signal. once disconnected and code cleared everything is fine. I've had numerous discussions with their "tech support" that basically offers no support at all.
Anyway, I was hoping that someone here has installed their own and/or can send me in the right direction to get a wiring diagram for the wires that I need to tap into so I can cross-check them against what they say I need to tap into. I'd really like to install this myself and not take it to someone if possible.
Thank you!
I installed it per their instructions and wiring call-outs and when it's hooked up it causes a ABS/Traction control fault for a bad steering angle sensor signal. once disconnected and code cleared everything is fine. I've had numerous discussions with their "tech support" that basically offers no support at all.
Anyway, I was hoping that someone here has installed their own and/or can send me in the right direction to get a wiring diagram for the wires that I need to tap into so I can cross-check them against what they say I need to tap into. I'd really like to install this myself and not take it to someone if possible.
Thank you!
Same shop manual dealer tech's use. Diagnostic procedures, emissions, and complete wiring diagrams.
.
The following users liked this post:
jbarr89 (02-12-2019)