FORD F150 SMOKE LED 3RD BRAKE TAIL LIGHT Installation question
I bought this light from racer-union on EBay. It says plug and play, but I can't find the connection point on my wiring harness. Has anybody installed this light?
|
what year truck do you have?
|
Originally Posted by lngrn36
(Post 131910)
I bought this light from racer-union on EBay. It says plug and play, but I can't find the connection point on my wiring harness. Has anybody installed this light?
We now require pics of the install;) |
2008 F-150 Fxr
Thanks, I will go try removing that clip right now!
|
Originally Posted by lngrn36
(Post 132096)
Thanks, I will go try moveing that clip right now!
|
pics
I was able to remove the clip. After I pulled the harness out enough to connect it I added duct tape around the sharp metal edges and taped down the connectors. Also I loaded the screws up with marine caulk to prevent water from passing through the holes. Pretty easy install. The pics files are too large so I posted them in my picture section.
|
Originally Posted by lngrn36
(Post 132119)
I was able to remove the clip. After I pulled the harness out enough to connect it I added duct tape around the sharp metal edges and taped down the connectors. Also I loaded the screws up with marine caulk to prevent water from passing through the holes. Pretty easy install. The pics files are too large so I posted them in my picture section.
|
Awsome looking 3rd brake light dude, an easy way to change the size of an image is right click, select edit, it sould bring up Paint, and go to image, select stretch/skew, change the percentage to a lower percentage to your liking and save or (save as) if you want to keep your original pics.
great job though! |
3rd brake light install PICS
6 Attachment(s)
thanks for the help on sizing the pics
|
more PICS
5 Attachment(s)
From start to finish took about 30 minutes.:D
|
All times are GMT -4. The time now is 10:54 AM. |
© 2024 MH Sub I, LLC dba Internet Brands