I bought this light from racer-union on EBay. It says plug and play, but I can't find the connection point on my wiring harness. Has anybody installed this light?

 

what year truck do you have?

 

Look in the opening where the light came from. Towards the passanger side there is a white clip holding the wire for the sockets to the cab. Push that clip in to get another 6" or so of cable loose. Now you have the plug that removes the sockets and plugs in the light.

We now require pics of the install

 

Thanks, I will go try removing that clip right now!

 

No worries.

 

I was able to remove the clip. After I pulled the harness out enough to connect it I added duct tape around the sharp metal edges and taped down the connectors. Also I loaded the screws up with marine caulk to prevent water from passing through the holes. Pretty easy install. The pics files are too large so I posted them in my picture section.

 

Cool, I was just bustin your chops about the pics. It is the MO around here. I will check em out.

 

Awsome looking 3rd brake light dude, an easy way to change the size of an image is right click, select edit, it sould bring up Paint, and go to image, select stretch/skew, change the percentage to a lower percentage to your liking and save or (save as) if you want to keep your original pics.
great job though!

 

thanks for the help on sizing the pics

 

From start to finish took about 30 minutes.