Topic Sponsor

Harmonic Balancer

Thread Tools
 
Search this Thread
 
Old Jul 21, 2010 | 09:06 AM
  #1  
Utahan's Avatar
Thread Starter
Member
 
Joined: Jul 2010
Posts: 31
Likes: 0
From: N.E. North Carolina
Default Harmonic Balancer

I am trying to find the correct balancer for my 95 351w which is replacing the 302 in my 96 4X4. Is the balancer 28 or 50 oz? Very confusing topic... I have found listings for both. The original balancer on the 351w is an "ET8A-A3A". My books dont call out the off balance spec... The 351w was already pulled when I bought it, the block numbers indicate a 95 truck which could be either an F or E series I believe. I dont think there is a difference in the two but at this point I am not sure. I will probably replace the fly wheel also. If someone can point me in the right direction I would appreciate the help.
Reply
Old Jul 21, 2010 | 06:07 PM
  #2  
Kattumaram's Avatar
Retired Aerospace
 
Joined: Dec 2008
Posts: 1,324
Likes: 14
From: Edgewater, Florida
Default Help Could Be Here:

The simple thing to do is call your local Ford dealer parts department and ask for what you need.

If that doesn't work, then you should be able to find what you want here:

www.rockauto.com

1995 F150 5.8L OHV

Harmonic balancer, Dorman #594011, Ford E8TZ-6316-B

Flexplate, Dorman #04349, Ford D1ZZ-6375-A
Reply
Old Jul 22, 2010 | 08:37 AM
  #3  
inc4203's Avatar
Junior Member
 
Joined: Jul 2010
Posts: 1
Likes: 0
Default

28 oz. on a 351w externally balanced
Reply
Old Jul 22, 2010 | 09:27 AM
  #4  
Utahan's Avatar
Thread Starter
Member
 
Joined: Jul 2010
Posts: 31
Likes: 0
From: N.E. North Carolina
Default

Thanks for the info/help. I have never ordered anything from Rock Auto until I ordered my parts this morning... Better prices than Summit.
Reply




All times are GMT -4. The time now is 01:58 PM.