Topic Sponsor

sputtering when stopping

Thread Tools
 
Search this Thread
 
Old 07-18-2011, 11:10 PM
  #1  
Junior Member
Thread Starter
 
onegun's Avatar
 
Join Date: Jul 2011
Location: Waterford , Michigan
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Angry sputtering when stopping

HELLO, Iam a newbe with a problem. My 150, when coming to a stop acts like it wants to stall. But dosent, just sputters and feels like it. Any ides on the subject? Its a f-150 2001 short bed v-6 auto. Thanks onegun
Old 07-19-2011, 06:01 PM
  #2  
Senior Member
 
Good old Bill's Avatar
 
Join Date: Feb 2008
Location: Henderson, NV.
Posts: 4,658
Likes: 0
Received 27 Likes on 25 Posts

Default

A couple of ideas, first verify the operation of the EGR. It cannot be on during idle speeds, stalling will occur. Second, disconnect the IAC and what is the idle speed? Get back to us if you are not familiar with the above mentioned items.
Old 07-21-2011, 01:06 PM
  #3  
Average Member
 
Superdave XL's Avatar
 
Join Date: May 2011
Location: Gwinnett County GA
Posts: 231
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by onegun
HELLO, Iam a newbe with a problem. My 150, when coming to a stop acts like it wants to stall. But dosent, just sputters and feels like it. Any ides on the subject? Its a f-150 2001 short bed v-6 auto. Thanks onegun

You're not giving her enough foreplay................
Old 07-24-2011, 12:25 AM
  #4  
Junior Member
Thread Starter
 
onegun's Avatar
 
Join Date: Jul 2011
Location: Waterford , Michigan
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default Good Old Bill

Thanks for the info, I think the IAC is sticking. Because sometimes it runs good and sometimes it almost stalls. Will keep working on it.
Old 08-09-2011, 03:46 PM
  #5  
Junior Member
Thread Starter
 
onegun's Avatar
 
Join Date: Jul 2011
Location: Waterford , Michigan
Posts: 4
Likes: 0
Received 0 Likes on 0 Posts
Default

anybody else have this problem, the odomiter goes on and off but the speedo and everything else is ok?
Old 08-10-2011, 09:31 AM
  #6  
Senior Member
 
Good old Bill's Avatar
 
Join Date: Feb 2008
Location: Henderson, NV.
Posts: 4,658
Likes: 0
Received 27 Likes on 25 Posts

Default

Use the search button for solder joints in the instrument cluster. Is your engine fixed?
Old 08-10-2011, 12:14 PM
  #7  
Member
 
banorcal's Avatar
 
Join Date: Nov 2009
Location: San Jose, CA
Posts: 61
Likes: 0
Received 0 Likes on 0 Posts

Default

The odometer is a whole seperate problem. sputtering on idle can also be a problem of the vacuums assembly check out the 90degree elbow at the end going into the intake. It is common for it to over time wear and crack



Quick Reply: sputtering when stopping



All times are GMT -4. The time now is 12:21 AM.