Lowering my truck...?
#32
Junior Member
Join Date: Aug 2009
Location: Dallas, Tx
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Leveling is not always up! You can get some lowering shackles for the back to lower it 2 inches to make it even with the front. If your not going to put bigger tires on it then I might consider going with that! Idk, its your choice just offering my 2 cents..
#33
whats the lowest you can go with a 4wd? (here comes a stupid question)... Mine I can change from 2wd to 4wd hi/low is that what you guys mean as having a "4wd" truck or do you mean like my Explorer where its always on 4wd?
#35
Old fart
Join Date: Dec 2007
Location: Amelia Ohio (East side Cincinnati)
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
First there are NO "stupid questions"
Some of the 06 Harleys are also AWD.
A Ground Force kit (#9966 I think), will let you lower your truck 2" ft & 4" rr (actuality 3.5").
DJM makes a real nice kit. Check out there web site.
Some of the 06 Harleys are also AWD.
A Ground Force kit (#9966 I think), will let you lower your truck 2" ft & 4" rr (actuality 3.5").
DJM makes a real nice kit. Check out there web site.
Last edited by 8up; 09-18-2009 at 10:39 AM.
#36
There are limits to how low you can go on a 4x4 because of pinion angle and all that crap. I would say a 4/6 drop on a 4x4 is the most. For those wanting to even out their ride, check out the rear end. I was looking into the leveling kit for a while and then waited. While doing my brakes I noticed 2" blocks bwtween the springs and axle. Wouldn't/shouldn't that level it out if I took those out of the back? Just another idea.