JLP long bars on a lowered '13
03-01-2017, 02:29 PM
#1
Senior Member
Thread Starter
JLP long bars on a lowered '13
I'm trying to find anyone that has installed a set (if they fit) on a 11-14 f150 that's also running a flip kit. pics would be great...also what modifications were needed to make them work
thanks in advance
http://www.jlpracing.com/jlp-5-0-f-150-traction-bars/
thanks in advance
http://www.jlpracing.com/jlp-5-0-f-150-traction-bars/
03-01-2017, 11:40 PM
#3
Senior Member
Thread Starter
wow you're in Hawaii....might cost a thousand dollars to ship here.
let me see if I can find a link, or maybe you can give me one, thanks
ok there aren't any links available to view. perhaps you can email a copy of the installation instructions? i'm trying to find out if the front bushing on the springs have to be replaced like the caltracs.
rojizo41 @ Hotmail.com
let me see if I can find a link, or maybe you can give me one, thanks
ok there aren't any links available to view. perhaps you can email a copy of the installation instructions? i'm trying to find out if the front bushing on the springs have to be replaced like the caltracs.
rojizo41 @ Hotmail.com
Last edited by rojizostang; 03-02-2017 at 12:37 AM.
03-13-2017, 02:42 PM
#5
Senior Member
Thread Starter
I installed a set of the VAS traction bars made for lowered/flip kit trucks. Very nice quality and I would say similar in operation to the Cal Tracs, however they are much easier to install as the springs don't have to be removed from the truck. They are just a wee bit noisy or clunky sounding though, but nothing unbearable.