Any Ford Lowering questions post here 65-2015 trucks.
08-24-2010, 06:27 PM
#181
F150 SUSPENSION GURU
Thread Starter
belltech front drop struts/belltech rear shocks/rear djm kit- $650 shipped
see it for less ill beat it
08-24-2010, 07:34 PM
#182
how bout the whole Belltech setup? with their 5" flip kit. if it won't mess up anything, i may as well use it, right? any idea what installation should cost?
08-24-2010, 08:30 PM
#183
Fumbling Through
Tony not very impressed after our conversation that the DJM 4/6 kit I got from you. Which I asked you if it came with everything needed for the suspension. You said it did. However I had to buy a additional camber alignment bolts (from the dealer of course $170 dollars later)
08-24-2010, 09:36 PM
#184
F150 SUSPENSION GURU
Thread Starter
Tony not very impressed after our conversation that the DJM 4/6 kit I got from you. Which I asked you if it came with everything needed for the suspension. You said it did. However I had to buy a additional camber alignment bolts (from the dealer of course $170 dollars later)
as i said front control arms/springs/rear kit.
also here is the link on djm site for their 4/6 kit
http://djmsuspension.com/application...7F150Parts.htm
which includes
4" Front \ 6" Rear
1)CA3097L-4
1)CA3097U
1)CS3097-2
1)FK3097-6
2)1415
2)1910 Lower Control Arms
Upper Control Arms
Front Coil Springs
Rear Flip Kit
Front Shocks
Rear Shocks
also its not needed with the a arm set up. Ive had more than my fair share of shops say it wont align and then get the customer to buy the camber kit which is not needed. The camber kit is only needed when doing a 3 inch drop spring in front.
Last edited by NORCAL SS; 08-24-2010 at 09:38 PM.
08-25-2010, 09:51 PM
#187
Member
Join Date: Aug 2010
Location: Great State Of Texas
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
06 Screw2wd not sureLess than a 1000 Here's my question....I want a 2-3/5 from Belltech or the 2/4 from djm but I pull a 17 1/2 fish/ski boat 2x a month and I don't want the rear to sag.Also would like to have new shocks/struts because mine are almost gone. I love the stance on treetops screw maybe alittle lower not much thou.
08-25-2010, 10:36 PM
#188
F150 SUSPENSION GURU
Thread Starter
06 Screw2wd not sureLess than a 1000 Here's my question....I want a 2-3/5 from Belltech or the 2/4 from djm but I pull a 17 1/2 fish/ski boat 2x a month and I don't want the rear to sag.Also would like to have new shocks/struts because mine are almost gone. I love the stance on treetops screw maybe alittle lower not much thou.
do the front belltech drop struts for 1-3 adjustable and rear djm 4 inch kit. you will need helper bags if you dont want lean
