Any Ford Lowering questions post here 65-2015 trucks.
#282
F150 SUSPENSION GURU
Thread Starter
#283
I am new to the site and to owning a ford, so I need some help. I use my truck to pull a trailer some and go to " The Depot" . It is my daily driver that I drive 100 miles a day, so comfort is key, but so is the aggresive drivability. For what I have is:
2007 Harley Davidson with a Saleen Supercharger
It has 24in wheels
2wd
I want it down like 2/4 or what ever would look best
I would like to get this as reasonable as I can
Thanks Jeff
2007 Harley Davidson with a Saleen Supercharger
It has 24in wheels
2wd
I want it down like 2/4 or what ever would look best
I would like to get this as reasonable as I can
Thanks Jeff
#284
F150 SUSPENSION GURU
Thread Starter
I am new to the site and to owning a ford, so I need some help. I use my truck to pull a trailer some and go to " The Depot" . It is my daily driver that I drive 100 miles a day, so comfort is key, but so is the aggresive drivability. For what I have is:
2007 Harley Davidson with a Saleen Supercharger
It has 24in wheels
2wd
I want it down like 2/4 or what ever would look best
I would like to get this as reasonable as I can
Thanks Jeff
2007 Harley Davidson with a Saleen Supercharger
It has 24in wheels
2wd
I want it down like 2/4 or what ever would look best
I would like to get this as reasonable as I can
Thanks Jeff
here is the 2/4 kit you can see front came down more than 2 inches and rear still has a rake to it
http://www.djmsuspension.com/Article...50DropKit.html
usually the 2/5 kit sits about even but if you like the little rake look which many do i would just do the 2/4 kit
#285
Hey,
Got a question.
On the 04-08 f150 if using the adjustable belltech strut at the 3" drop level do you need to "lengthen the alignment slot"? It says its not normally needed for the 2" drop but is recommended for use with the 3" drop coils. I wasn't sure because it also warns against using a 3" drop coil while using the strut at its full drop.
Thanks,
Wade
Got a question.
On the 04-08 f150 if using the adjustable belltech strut at the 3" drop level do you need to "lengthen the alignment slot"? It says its not normally needed for the 2" drop but is recommended for use with the 3" drop coils. I wasn't sure because it also warns against using a 3" drop coil while using the strut at its full drop.
Thanks,
Wade
#286
F150 SUSPENSION GURU
Thread Starter
Hey,
Got a question.
On the 04-08 f150 if using the adjustable belltech strut at the 3" drop level do you need to "lengthen the alignment slot"? It says its not normally needed for the 2" drop but is recommended for use with the 3" drop coils. I wasn't sure because it also warns against using a 3" drop coil while using the strut at its full drop.
Thanks,
Wade
Got a question.
On the 04-08 f150 if using the adjustable belltech strut at the 3" drop level do you need to "lengthen the alignment slot"? It says its not normally needed for the 2" drop but is recommended for use with the 3" drop coils. I wasn't sure because it also warns against using a 3" drop coil while using the strut at its full drop.
Thanks,
Wade
#288
F150 SUSPENSION GURU
Thread Starter
the djm set up is new control arms in front the 2 inch kit will drop it about 2.5 inches and ride is great.
#289
How much for drop shackles to lower the rear on a 2010 FX2 to level the rear with the front?
#290
Senior Member
well if you want 3 inches in front you will need the dream beams and in rear you can do a flip kit for 5 inches but you will need to use yoru stock shackles this would put it 3 inches then where your at now. that kit is 535 shipped to your door. and ill beat anyones prices shipped. also if you wanted it 4 inches then what your at now just use the rear flip kit and move the shakle to the bolt hole 1 lower down.