2010 belltech lowering strut and lowering spring
#1
Member
Thread Starter
2010 belltech lowering strut and lowering spring
Has anyone attempted or know if you can run a belltech lowering strut and a belltech lowering spring. To equal a 6 inch drop in the front on a 2010 f150 crew cab. I want to lower my truck 6 inches in the front.
#2
Senior Member
that's not going to work well. I had that set up and it resulted in not enough downward front end travel. it broke two belltech struts. I gave up on them and went to cal max 3" drop control arms and reused the stock struts and then shortened the stock springs. the result is a nice low but smooth ride. your desired set up will result in a suspension that can't handle rough pavement (speaking of the belltechs).
kind of long, but read this
https://www.f150forum.com/f66/lets-s...5/#post5114100
kind of long, but read this
https://www.f150forum.com/f66/lets-s...5/#post5114100
Last edited by rojizostang; 03-31-2017 at 04:03 PM.