15+ guys with 3/5 or lower what tire size?
#12
I believe oem wheels are +44 offset, now just need to find a company that widens wheels close by. Tire shop i always go to said they can mount a 315/35 on my oem 20's that they've done it before, but idk doesn't sound right lol
The following users liked this post:
Thehydro (02-04-2021)
#16
Old thread I know... Goose or Unbroken, what offset are your wheels, (Unbroken I know +30)? Any rubbing in the front? Do you think a 10.5" wheel would fit in the front without major modifications?
I have a choice between a 9.5" or 10.5" wheel and would prefer to run a wider wheel for aesthetics, but not sure if the 10.5 will fit on the front.
TIA, David
I have a choice between a 9.5" or 10.5" wheel and would prefer to run a wider wheel for aesthetics, but not sure if the 10.5 will fit on the front.
TIA, David
Last edited by TriSum; 09-29-2019 at 01:58 PM. Reason: because
#17
Senior Member
iTrader: (1)
Old thread I know... Goose or Unbroken, what offset are your wheels, (Unbroken I know +30)? Any rubbing in the front? Do you think a 10.5" wheel would fit in the front without major modifications?
I have a choice between a 9.5" or 10.5" wheel and would prefer to run a wider wheel for aesthetics, but not sure if the 10.5 will fit on the front.
TIA, David
I have a choice between a 9.5" or 10.5" wheel and would prefer to run a wider wheel for aesthetics, but not sure if the 10.5 will fit on the front.
TIA, David
What size wheel? I'm assuming since it's available in a 10.5" wheel, that you are looking at 22" wheels.
#18
Hey Goose, yes 22" wheels. I was thinking about the staggered option, but being 4x4 I can't find tires that are the same diameter. Closest I can find is .6" difference, (285/40 @ 31" and 305/40 @ 31.6"), which I'm assuming the transfer case wouldn't like. I can order the wheels with whatever offset I like, so a 10.5" wheel with 36mm offset would fit the same on the outside, (fender) and be .5" closer on the inside. Just not sure if there is enough room in there to clear the extra width even though yours is taller.
Your setup is ~32.5" overall vs. the 31.6" of what my setup would be, but the extra .5" of wheel width is what is the unknown. Did you trim anything on the inside?
David
Your setup is ~32.5" overall vs. the 31.6" of what my setup would be, but the extra .5" of wheel width is what is the unknown. Did you trim anything on the inside?
David
My wheels are the same as unbroken's +30. Honestly if it were me I would go with a 9.5 in front and a 10.5 in the rear. If you go with 10.5 all around you will need a slightly different offset to ensure no rubbing. The +30 brings a 10" wide wheel near flush with the fenders...
What size wheel? I'm assuming since it's available in a 10.5" wheel, that you are looking at 22" wheels.
What size wheel? I'm assuming since it's available in a 10.5" wheel, that you are looking at 22" wheels.
#19
Senior Member
iTrader: (1)
Hey Goose, yes 22" wheels. I was thinking about the staggered option, but being 4x4 I can't find tires that are the same diameter. Closest I can find is .6" difference, (285/40 @ 31" and 305/40 @ 31.6"), which I'm assuming the transfer case wouldn't like. I can order the wheels with whatever offset I like, so a 10.5" wheel with 36mm offset would fit the same on the outside, (fender) and be .5" closer on the inside. Just not sure if there is enough room in there to clear the extra width even though yours is taller.
Your setup is ~32.5" overall vs. the 31.6" of what my setup would be, but the extra .5" of wheel width is what is the unknown. Did you trim anything on the inside?
David
Your setup is ~32.5" overall vs. the 31.6" of what my setup would be, but the extra .5" of wheel width is what is the unknown. Did you trim anything on the inside?
David
#20