22" rockstars with 40" interco m16's for sale
09-27-2011, 06:27 PM
#1
Junior Member
Thread Starter
Join Date: May 2011
Location: Fort Myers, FL
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
22" rockstars with 40" interco m16's for sale
I'm Looking to sell or trade my rims and tires, they are 22x12 rockstars and 40x14.5 m16's. Tires have about 60-70% tread left. I can put more pics up if needed.
There is no set price, make me an offer. Possible trade for black 20" rim and tire combos as well
There is no set price, make me an offer. Possible trade for black 20" rim and tire combos as well
09-27-2011, 09:17 PM
#2
May I ask how you were able to fit that big of tire in the front? I am looking at 37"s and I have a 6" pro-comp with a 2" leveling kit in the front and 8" Atlas rear leaf springs in the back. A total of 8"s of lift. The only thing is, I talked to a shop locally and they say the back would be perfectly fine, but the front is a different story. They said that I would have to cut into the back wheel well and possibly the front. Due to the cutting, I would have to get fender flares ("cut out" fender flares from bushwacker?); they said. I ask them if there were coil-overs that could raise my truck a little in the front more, and they said its more complicated then that. Could you maybe help me out here, and give me your advice on my situation. By the way good luck on your trade/sale, sorry for typing this here.
09-28-2011, 06:37 PM
#4
Junior Member
Thread Starter
Join Date: May 2011
Location: Fort Myers, FL
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Irish- I have a leveling and a body lift and they clear pretty good, with no cutting of my fenders. I could be wrong but there are only a few things you could do, it just depends on how much you're willing to spend. You could just get a 3" body lift and then you would clear no problem and just spend a couple hundred dollars or you could go with a whole new suspension kit and get an 8" instead of the 6". I've asked a couple places if theres anything I could do to make mine like an inch or so higher and Haven't heard any ideas, the only thing they can tell me is a bigger lift. I know it's not much, but hope it helps some
09-29-2011, 02:44 AM
#5
Irish- I have a leveling and a body lift and they clear pretty good, with no cutting of my fenders. I could be wrong but there are only a few things you could do, it just depends on how much you're willing to spend. You could just get a 3" body lift and then you would clear no problem and just spend a couple hundred dollars or you could go with a whole new suspension kit and get an 8" instead of the 6". I've asked a couple places if theres anything I could do to make mine like an inch or so higher and Haven't heard any ideas, the only thing they can tell me is a bigger lift. I know it's not much, but hope it helps some
