Would size lift would i need to fit 35's?
#1
Would size lift would i need to fit 35's?
Have a 1997 f-150 2wd Triton 4.6L. It's at stock height right now. What size lift would I need to fit 35's with out rubbing ? I am looking more towards suspension lift kits and not looking to spend $2000 grand just in a lift kit ether. Any help or past set ups would be nice. Thanks!
#2
Herr boyo:
https://www.f150forum.com/f6/35s-tbars-cranked-197341/
Should be some 2wd stuff in there too.
https://www.f150forum.com/f6/35s-tbars-cranked-197341/
Should be some 2wd stuff in there too.
#3
Herr boyo: https://www.f150forum.com/f6/35s-tbars-cranked-197341/ Should be some 2wd stuff in there too.
#4
Here's a thread to help https://www.f150forum.com/f6/35s-3-5...ft-2wd-222991/
The following users liked this post:
banksh (12-02-2013)
#6
You can clear 35s for around $700 or less. You need a 3" block in the rear. Rough country spindle lift with a 2.5" coil spacer in the front. Not the best ride but it's cheap and can clear 35s. I run the **** out of my truck and it holds up fine. If you remove the sway bar the ride is also smoother