Or cop a feel, see if shes hot.

 

LOL, yes indeed sir Jbrew.

Here's the bottom of a F0AB-14B192-AA relay. Incoming power (12V) should be present where blade 30 goes. The output going to the relay the center blade, 87A. You can also run a jumper between those two to see if it's a relay issue.

 

Dang, that last reply might be conscrewed as , -like gutterendo talk or something.

If warm or hot, -usually means the relay is bad. So yea, get rid of her, plenty more were that came from.

 

Yeah, kick her to the curb. Whatever she's got, you don't need it.

 

I did replace all the fuses and relays that the "book" said had to do with the PCM. I had previously switched the relay with the one next to it.

Forgot to mention that before.

I will pull all connectors and spray them down.