When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hey fellas! I have been perplexed by this one particular situation with my window molding. This one piece has been missing and I tried to get it from a salvage yard and I did get something that looked exactly like the one on the other side, however it didn't fit at all. It looks like it's slightly larger actually. I scoured the internet and I'm sure that I was calling it the wrong piece which is probably why wasn't able to find any trace of it. Would there be a specific name for this piece? Would anybody have an idea where to get it? The rainy season is nearly here and it's basically a direct water Flume into the innards of my door, so I would like to prevent that. Thanks in advance for your help
Here's a piece that I pulled off what I thought was a 2000 in the salvage yard. If there is a better way to do it than using this plastic piece, please post the link. Thanks very much.
.
It could be from PUTCO via Amazon ---> they called the 4-pc kit Window Trim.
What year is your truck?
Looking at the pic you posted methinks you've got the chrome passenger side (rear door) trim piece on the drivers side back door. The blunt straight edge should face the front of vehicle and with the "pointy-end" at the rear.
.
It could be from PUTCO via Amazon ---> they called the 4-pc kit Window Trim.
What year is your truck?
Looking at the pic you posted methinks you've got the chrome passenger side (rear door) trim piece on the drivers side back door. The blunt straight edge should face the front of vehicle and with the "pointy-end" at the rear.
It's a 2000.. No chrome to speak of (!?)
Last edited by Streetwiseguitar; 05-25-2019 at 05:37 PM.
05-24-2019, 01:42 PM
Window molding
