What did you do to your 10th gen today?
#6541
#6543
Senior Member
iTrader: (1)
#6544
~60 foot pounds on the ball joint part.
Or fricken tight on the frame and a wrap from an impact gun on the joint.
For suspension components a torque wrench isn't really needed.
#6545
Senior Member
so in other words.....crank the ****e outta the frame bolts and snug firmly the ball joint one
#6546
#6547
Senior Member
drove it to work yesterday and I really need to get my rear seal fixed cause I can really feel the back end start to grind and its leaking onto my brakes
you can see where it has leaked onto my tire and on the back of the brake and on the inside of the brake cover
you can see where it has leaked onto my tire and on the back of the brake and on the inside of the brake cover
Last edited by mattmark6; 06-06-2013 at 11:56 AM.
#6550
Junkyard Crusader
Was bored and did the fog light mod, was a lot easier than I thought. While I had the switch apart I soldered on a whit led in place of the old yellow one, looks a helluva lot better. If nyone wants help on the fog mod let me know