Transmission? very odd. 4th gear to neutral
#1
AJ5573
Thread Starter
Join Date: Sep 2009
Location: Houston
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Transmission? very odd. 4th gear to neutral
I was driving up the Mississippi bridge today (from houston) no problems the whole way, but when i almost reached the top i lost power the the wheels, as if in neutral. Id give it gas and all it did was rev. I coasted off the bridge and turned the truck of thinking it had something to do with the programmer. Started it back up and it would egnage into reverse and also into drive so not the drive shaft. Drive worked for about 30 seconds and then it felt like it was in neutral. First and second gear manually shifting seem to work just fine. If you have any idea what might be goin on and insight is much appreciated.
#3
AJ5573
Thread Starter
Join Date: Sep 2009
Location: Houston
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
yea i just went out to see what was up .. it works when i take it out of OD but the highest gear now is 3rd... i guess there is somekind of solenoid or somethn in there that broke
#6
might be the TCC solenoid or your 3-4 clutch or band is bad... check the fluid level when its hot and running... is it at the right level? does the fluid smell burned? is it dark? is there metal flakes suspended in the fluid?
Last edited by lifted98_f150; 09-09-2011 at 09:03 PM.
#7
AJ5573
Thread Starter
Join Date: Sep 2009
Location: Houston
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
fluid is fine ... more than likely its the solenoid 3-4 when I get this fixed im gonna change my shift points. Think my bigger tires had been putting to much stress on OD .. OD wanted to engage doin city driving .. doin a lumbo kinda thing, not fully engaging
Trending Topics
#8
in the city i NEVER drive with OD on its always off till i hit the highway i've never had any tranny problems with my 35s. if you can scan it and see if it has any codes if i were to guess without actually diagnosing it i'd have to say its prob. tcc (torque converter clutch) solenoid... at work everytime i do a tcc solenoid i always replace the valve body... not necessary but cleaning the valve body is necessary
Last edited by lifted98_f150; 09-14-2011 at 12:23 AM.