I have been searching the forum and internet for hours now. I have read a few post however they do not help.
So to start out the truck is a 97 f250 4x4 with the 4.6
Anyways, my stop/brake/turn lamps stopped working I narrowed it down to the plug that is on the driver side above the spare tire on the frame(Main plug on the wiring harness.)
My plan is to wire a new plug in as mine is destroyed and was being held in by zip ties. the wires are also shorting out at the plug. I plan to cut the wires and solder and heat shrink a new male and female plug in place.
Does anyone happen to have a wiring diagram or the pin out for the plug.

 

If the wires are still in the plug. Cut one wire at a time from each plug that line up with each other. That will be the same color and size.

http://www.revbase.com/BBBMotor/Wd