Topic Sponsor
1997 - 2003 Ford F150 General discussion on the Ford 1997 - 2003 F150 truck.

Stalling at Idle -- Need Help!

Thread Tools
 
Search this Thread
 
Old Feb 7, 2013 | 05:39 PM
  #1  
itsryan7290's Avatar
Thread Starter
Junior Member
 
Joined: May 2012
Posts: 23
Likes: 0
Default Stalling at Idle -- Need Help!

Hey guys I have a 2002 ford f150 with 112,xxx miles. It runs great when I am cruising around but as soon as I idle at a stop sign/light etc. the truck wants to stall. The "service engine soon light" just came on and i ran the codes and they came up as 0171 and 0174. These codes translate into the engine running too lean. I changed the fuel filter but that did absolutely nothing. Does anyone else have any other ideas?
Reply
Old Feb 7, 2013 | 05:56 PM
  #2  
osimic's Avatar
Member
 
Joined: Dec 2012
Posts: 76
Likes: 0
Default

possibly bad oxygen sensor. They re supposed to be replaced at 60k.

Could also be a clogged EGR system component. (EGR line, EGR Valve, DPFE lines, or the ports that flow into the throttle body elbow after the EGR valve.)

Bad fuel filter could also be the cause.

Hope the info helps ya pal
Reply
Old Feb 7, 2013 | 06:39 PM
  #3  
akdoggie's Avatar
Senior Member
Liked
Loved
Community Favorite
Top Answer: 1
 
Joined: Jul 2010
Posts: 8,544
Likes: 2,552
From: Alaska
Default

Check for a bad or cracked elbow at the PCV valve. A good can of carb cleaner will help you find the leak. You may have a leaking intake also. Those are somewhat common problems with these engines.
Reply
Old Feb 7, 2013 | 08:50 PM
  #4  
SCrewed's Avatar
Member
 
Joined: Apr 2012
Posts: 63
Likes: 1
Default

Just had my intake manifold replaced because of the same problem.
Reply
Old Feb 7, 2013 | 11:34 PM
  #5  
BlaCkdout02FX4's Avatar
Member
 
Joined: Feb 2011
Posts: 93
Likes: 0
From: Oklahoma
Default

Just got mine outta the shop for the same thing had 3 broken wires in maf circuit and leaks on the intake and egr valve
Reply




All times are GMT -4. The time now is 02:24 AM.